User manual

The WebMux Pro and Model WM108E User Guide – Version 5. 8 Rev15

• Power up all devices in the network.

• Verify that all the devices are up and running.

• You are now ready to configure WebMux.

Hardware Setup ---Configuration Summary

CAUTION: Do not proceed without collecting all necessary information.

• Turn on WebMux. Turn on the switch on the back of the WebMux and

push the power-on button in the front momentarily. You will see the

version number like this:

•

After self-test, hold down the Check-Mark button on the WebMux until

LCD displays the first question – “Enter WebMux host name”.

•

During the initial configuration, you will be asked to provide names and IP

addresses. (See next section.) Each item is explained in the order it is

asked.

•

Answer the questions. Reboot. Note: When reboot is complete, the

service statistics screen will appear.

•

Run the Management Browser.

Initial Configuration

Enter WebMux Host Name:

Enter the host name of the WebMux. Use the right arrow to move the position,

the up and down arrows to select characters, left arrow to move back in position,

check mark button to confirm the change. This host name is for identification

purposes. You may call it webmux1, webmux2, etc. (Trick to enter name