User manual

The WebMux Pro and Model WM108E User Guide – Version 5. 8 Rev15
Copyright© 1997-2004 CAI Networks, Inc.
23
After the WebMux is rebooted, the statistics of the incoming package, outgoing
package, etc will be displayed on LCD periodically.
What if I made mistake in my configuration?
One can always make changes to the hardware settings by press the Check-
Mark button for three seconds when the statistic screen showing. It will start the
prompt questions which will allow the user to navigate from one prompt to
another by using the up/down button on the left most LCD position. For example,
if you configured the Allowed Hosts wrong and lock yourself out, you can go to
the push buttons and select “Clr Allowed Hosts” option, save changes and reboot,
which will allow all the IP address to access the management console through
browser. You can clear the allowed hosts but not reset the password, or change
one option and not change the others.