User manual

The WebMux Pro and Model WM108E User Guide – Version 5. 8 Rev15

Main Components

Front View

Toggle Power Switch

This switch toggles power on and off. To power off, the switch must be pressed

and held for 5 seconds.

Reset Button

Press and release the reset button to reset the WebMux. This process may take

several minutes to complete.

Up Arrow Button, Down Arrow Button

When each button pressed, the value of the cursor location increases or

decreased. It goes through lower case letters, upper case letters, numbers and

symbols. When cursor is located at the left most position on the LCD, up and

down arrow also allow user to select different item to setup.

Left Arrow Button and Right Arrow Button

When each button is pressed, the cursor moves to the left and right.

Check Mark Button, and Cross Button

Check Mark Button confirms the selection, Cross Button cancels the selection. At

any time during the system running, hold down to the Check Mark Button will

invoke the configuration menu allowing the IP address changes.