User manual

The WebMux Pro and Model WM108E User Guide – Version 5. 8 Rev15

Initial setup change Through Browser

Sometimes users like to change the basic settings for the WebMux through

browser interface, for example, when WebMux located in a hosting center across

the country. If one has information about the WebMux current basic settings,

one could change those parameters through browser. On the browser, enter the

following URL:

https://webmux_ip:webmux_manage_port/cgi-bin/rec

For example, if your webmux IP is 192.168.12.1, and your

webmux_manage_port is 24, your URL will be

http://192.168.12.1:24/cgi-bin/rec

The first screen in “rec” – reconfiguration, asks for the supervisor’s password.

The default supervisor’s password is “supervisor”, however, the actual

supervisor’s password may had been changed by the system administrator. If

you could not remember the supervisor’s password, someone has to go to the

keypad to reset the password. See page 22 for more details.

The next question on the screen asks to set the time in the WebMux. WebMux

uses its clock to set cookie for the management browser. When a WebMux

manager login more than 8 hours without activity, WebMux will log out the user

based on the cookie. However, if the clock is off by more than 8 hours, the

manager will not be able to login into WebMux. The second section on the “rec”

screen will allow the manager to correct the clock, if it is off.