User Manual

3
Need help? Customer Support 866-294-1660
Mon.- Fri. Hours: 7 am to 6 pm MST
www.weboost.com
ENGLISH
Before Getting Started
Before you install your Connect 3G-X and
start enjoying improved cellular reception
in your facility, please do the following:
1. Read through all the installation
steps. This will help you know what to
expect from start to nish.
2. Watch the YouTube video
demonstrating the Connect 3G-X
installation at weboost/us/connect3G-
Xvideo.
3. Familiarize yourself with all materials
in your product package. This will
allow you to know which pieces are
referenced in the instructions.
4. Identify the location of your best
available cellular signal. See
instructions that follow.
5. Determine the best installation
locations for your Outside Antenna,
Signal Boost, and Inside Antenna.
Test the function of your Connect
3G-X system before nalizing
installation.
Find the Strongest Cellular Signal
Before you install your Connect 3G-X signal
booster, you must determine the location of
the best available cellular signal. This will
affect the location of your Outside Antenna
and will help you get the best performance
from your Connect 3G-X. You can nd
the strongest signal outside your building,
typically at the highest point available, using
any of the following methods:
1. Best method:
Connect the Outside Antenna to the
Connect 3G-X signal booster, and the
Connect 3G-X to the Inside Antenna.
Have one person outside (on the roof
for best results) rotate the Outside
Antenna with a second person inside
the building near the Inside Antenna
watching the signal strength on a
phone. This allows you to read the
signal strength from nearby cell towers.
a. The person inside should have
the phone in test mode so the
numerical signal strength can be
read. This is more accurate than
Connect 3G-X
™
Package Contents
Tools Required for Installation:
(depending on your particular installation, you will need the following tools)
1. Pole mount - 10 mm open-end wrench or adjustable wrench
2. Wall mount - Drill and 3/16 inch bit, Phillips-head screwdriver
Panel Antenna
w/F-Female Connectors
RG6 30’ Coax Cable
w/F-Male Connectors
Required F-Female to N-Male
adapter
Upgrade Option (311155- 0630)
AC Power Supply
6V / 2.5A
(Not included with some models)
(859912)
Outside Antenna Kit
50 Ohm Wide Band Antenna
75’ LMR Cable
(314411-40075)
Panel Antenna Kit
Panel Antenna
60’ LMR Cable
(311135-40075)
Wall Mount BracketPole Mount Bracket