Product Manual B

CELL PHONE SIGNAL BOOSTER DRIVE SLEEK

______

Step 4: Connect System To

Power

Connect the power to the 12V

CLA port on your vehicle

and route power cable back to the booster.

Connect power cable to booster port labeled

NOTE: We recommend routing with the same path as the cradle/booster

cable (under mats and between seats). Cable clips are provided to help

route & secure the cables.

NOTE: The booster will be on whenever there is power from the 12V CLA

port. If your vehicle always has power going to this port, you may want to

unplug this when you’re not driving so the booster does not drain your

battery.

Only 12V ports are supported.

ANTENNA

connect power supply

to 12V port

connect

to booster

cable from power supply

cable clip