Use and Care Manual
2
CELL PHONE SIGNAL BOOSTER HOME COMPLETE
______
Preparation
NOTE: These instructions will walk you through a “soft” install process to fi nd 
the optimal locations for the inside and outside antennas, then through the 
process of the permanent installation.
You Will Need (tools not included)
Make sure the following materials are prepared and ready for your 
installation.
Ladder
Drill (if routing cable through wall)
1”-3” diameter existing pole for mounting   
Outside Antenna (#901117 Pole Mount can be   
purchased separately if needed)
Recommended: Power Strip with surge protection
1 to 2 hours
1 Person (2 people to make antenna calibration easier)










