User Manual

3
ENGLISH
Need help? Customer Support 866-294-1660
Mon.- Fri. Hours: 7 am to 6 pm MST
www.weBoost.com
Before Getting Started
Before you install your Connect 4G-X and
start enjoying improved cellular reception
in your facility, please do the following:
1. Read through all the installation
steps. This will help you know what to
expect from start to nish.
2. Watch the YouTube video
demonstrating the Connect 4G-X
installation at weboost.com/us/
connect4G-Xvideo.
3. Familiarize yourself with all materials
in your product package. This will
allow you to know which pieces we
reference in the instructions.
4. Identify the location of your best
available cellular signal. See
instructions that follow.
5. Determine the best installation
locations for your Outside Antenna,
Signal Boost, and Inside Antenna.
Connect all cables and test the
function of your Connect 4G-X system
before nalizing installation.
Package Contents
Tools Required for Installation:
(depending on your particular installation, you will need the following tools)
1. Pole mount - 10 mm open-end wrench or adjustable wrench
2. Wall mount or Rafter mount - Drill and 3/16 inch bit, Phillips-head screwdriver
Find the Strongest Cellular Signal
Before you install your Connect 4G-X signal
booster, you must determine the location of
the best available cellular signal. This will
affect the location of your Outside Antenna
and will help you get the best performance
from your Connect 4G-X. You can nd
the strongest signal outside your building,
typically at the highest point available, using
any of the following methods:
1. Best method:
After connecting power the power
supply to your surge protected power
strip, connect the Outside Antenna
to the Connect 4G-X signal booster,
and the Connect 4G-X to the Inside
Antenna. Have one person outside
(on the roof for best results) rotate the
Outside Antenna with a second person
inside the building near the Inside
Antenna watching the signal strength
on a phone. This allows you to read the
signal strength from nearby cell towers.
a. The person inside should have
the phone in test mode so the
numerical signal strength can be
read. This is more accurate than
the bar indicator. Go to
Appearance of device and accessories may vary.
Wall Mount BracketPole Mount Bracket
12V / 3A, AC/DC Power
Supply (859900)
Panel Antenna
(311135-40060)
Wide Band Directional Antenna
(314411-40075)
60’ LMR Cable
(952360)
75’ LMR Cable
(952375)
Connect 4G-X
™
(461104)