Brochure

Page 32
Job/Customer ___________________________________________ Date _________________________ Contractor ______________________________________
Model Specifi ed __________________________________________ Qty __________________________ Approved By_____________________________________
Designer/Engineer _______________________________________ Date _________________________ Contractor’s PO# ________________________________
Submitted by ____________________________________________ Date _________________________ Other ___________________________________________
THIS SPACE FOR DESIGNER / ENGINEER APPROVAL
Full Port Forged Brass Ball Valves
Forged Brass Hose Bibbs w/ Ball Valve Action
3031 Series - MIP × Hose
125 WOG
ISO 9001
8
7
5
6
1
4
2
3
9
D
C
B
A
ITEM # SIZE CTN/CASE A B C D
W/ T HANDLE
30314* 1⁄ 2" 12/72 1/4 3 3/4 1 9/16 2
30316 3⁄4" 12/72 1/4 3 5/8 1 11/16 2
W/ LOCKING HANDLE
30312* 1⁄ 2" 12/72 1/4 3 3/4 2 13/16 3
30313 3⁄4" 12/72 1/4 3 5/8 2 3
NO. DESCRIPTION MATERIAL
1BODY BRASS
2END CAP BRASS
3SEATS PTFE
4BALL BRASS HCP
5STEM BRASS
6PACKING GLAND BRASS
7 HANDLE ZINC W/ EPOXY COATING
8STEM SEAL PTFE
9HANDLE SCREW BRASS
*1⁄2" models are MIP or SWT × Hose.
w/ T Handle w/ Locking Handle
TEMP °F PSI
100 200
150 200
200 200
Speci cations: Designed for residential, commercial or industrial use with water. This approved Webstone valve features an adjustable packing gland.
Hose ends comply with ANSI B1.20.7. Threaded ends comply with ANSI B1.20.7. Solder joint temperature ratings are per ASME B16.18 Annex A for
95-5 solder. Other solder materials have lower pressure/temperature limits. Do not silver braze or overheat valves when soldering.