Brochure

Page 40
Job/Customer ___________________________________________ Date _________________________ Contractor ______________________________________
Model Specifi ed __________________________________________ Qty __________________________ Approved By_____________________________________
Designer/Engineer _______________________________________ Date _________________________ Contractor’s PO# ________________________________
Submitted by ____________________________________________ Date _________________________ Other ___________________________________________
THIS SPACE FOR DESIGNER / ENGINEER APPROVAL
Brass Balancing Valves
w/ Butterfly Action & Screwdriver Slot
Brass Purge & Balancing Valves
w/ Butterfly Action & Screwdriver Slot
125 PSI
ISO 9001
125 PSI
ISO 9001
20103 - C×C
ITEM # SIZE CTN/CASE AB
20103 3/4" 12/72 2 5/16 2 1/4
NO. DESCRIPTION MATERIAL
1PACKING GLAND BRASS
2STEM BRASS
3STEM SEAL NBR
4BODY BRASS
20103 - C×C
Speci cations: Designed for residential and commercial
use to regulate  ow. Ideal for use in hydronic closed
loop heating systems. Regulates  ow in multiple or
single zone applications. Butter y action diminishes
noise and chatter in the system often encountered
with gate valves use. Slotted actuation minimizes
unintended adjustments. For use in 3/4" copper
piping lines. Solder joint temperature ratings are per
ASME B16.18 Annex A for 95-5 solder. Other solder
materials have lower pressure/temperature limits. Do
not silver braze or overheat valves when soldering.
B
A
1
2
3
4
11603 - C×C
ITEM # SIZE CTN/CASE ABC C
11603 3/4" 12/72 2 3/8 1 7/8 2 3/4
NO. DESCRIPTION MATERIAL
1PACKING GLAND BRASS
2STEM SEAL NBR
3STEM BRASS
4BODY BRASS
5O-RING NBR
6 DRAIN STEM BRASS
11603 - C×C
Speci cations: Designed for residential and commercial
use to regulate  ow. Ideal for use in hydronic closed loop
heating systems. Regulates  ow in multiple or single
zone applications. Butter y action diminishes noise and
chatter in the system often encountered with gate valves
use. Purge feature easily eliminates air from the system
which frequently causes poor water circulation, noise
and undue wear and tear on the hydronic system. Slotted
actuation minimizes unintended adjustments. For use in
3/4" copper piping lines. Solder joint temperature ratings
are per ASME B16.18 Annex A for 95-5 solder. Other
solder materials have lower pressure/temperature limits.
Do not silver braze or overheat valves when soldering.
3
1
4
2
C
5
6
B
A
Radiator Valve Spud Wrench
ISO 9001
25011
ITEM # SIZE CTN/CASE ABCDEFG
25011
1/2"–2"
RADIATOR VALVES
10/20 10 1/2 1/2 3/4 1 1 1/4 2 1 1/2
NO. DESCRIPTION MATERIAL
1BODY ZINC
25011
A
B
C
D
E
F
G
1
Speci cations: Designed for use with a radiator
valve union tailpiece connection. This heavy duty
tool is used internally to securely tighten any union
tailpiece to a radiator and  ts valve sizes ½" to 2".