Brochure

Page 37
Job/Customer ___________________________________________ Date _________________________ Contractor ______________________________________
Model Specifi ed __________________________________________ Qty __________________________ Approved By_____________________________________
Designer/Engineer _______________________________________ Date _________________________ Contractor’s PO# ________________________________
Submitted by ____________________________________________ Date _________________________ Other ___________________________________________
THIS SPACE FOR DESIGNER / ENGINEER APPROVAL
Page 37
7400 Series - IPS
Speci cations: Designed for residential, commercial or industrial use to quickly extract micro bubbles and static air from a hydronic heating system. The Air Separator must be installed in
a straight run of horizontal piping and positioned precisely upright. Designated lengths of straight piping before and after the unit are not required. Neither side is designated as an inlet
or outlet; the  ow may be directed in either direction. Threaded ends comply with ANSI B1.20.1. Solder joint temperature ratings are per ASME B16.18 Annex A for 95-5
solder. Other solder materials have lower pressure/temperature limits. Do not silver braze or overheat valves when soldering.
ITEM # SIZE CTN/CASE ABCDMax GPM
74003 3/4" 1 6 1/4 3 5/8 3/4 1/2 6
74004 1" 1 6 1/4 3 3/4 1 1/2 10
74005 1 1/4" 1 6 1/43 7/81 1/4 1/2 15
74006 1 1/2" 1 9 1/8 5 1 1/2 1/2 30
74007 2" 1 9 1/8 5 1/8 2 1/2 40
Forged Brass Air Separator
w/ Removable Vent Head & Coalescing Medium
150 PSI
ISO 9001
7400 Series - IPS
7500 Series - C×C
7500 Series - C×C
NO DESCRIPTION MATERIAL
1LOWER BODY BRASS
2 UPPER BODY BRASS
3BODY CAP BRASS
4 BODY CAP RING BRASS
5VENT CAP BRASS
6 VENT CAP WASHER BRASS
7 VENT PIN ASSEMBLY BRASS
8 VENT SPRING STAINLESS STEEL
9VENT O-RING EPDM
10 VENT/FLOAT ARM ASSEMBLY STAINLESS STEEL
11 BODY CAP O-RING EPDM
12 FLOAT PLASTIC
13 FLOAT ALIGNMENT PIN BRASS
14 BODY O-RING EPDM
15 BAFFEL STAINLESS STEEL
16 MESH STAINLESS STEEL
C
D
B
C
A
1
2
3
4
5
6
12
13
14
15
16
7
8
9
11
10
ITEM # SIZE CTN/CASE ABCDMax GPM
75003 3/4" 1 6 1/4 4 3/4 1/2 6
75004 1" 1 6 1/4 4 1/2 1 1/2 10
75005 1 1/4" 1 6 1/4 4 1/2 1 1/4 1/2 15
75006 1 1/2" 1 9 1/8 5 5/8 1 1/2 1/2 30
75007 2" 1 9 1/8 6 1/8 2 1/2 40