SAVING VALVES STEP FOR THE PROFESSIONAL
THE OLD WAY On Ball Valve On Off • Eliminate assemblies needed to isolate & drain any portion of a piped system Off Ball Valve REPLACES 4 COMPONENTS ELIMINATES 3 LEAK PATHS SAVES 27 MINUTES OF LABOR • Winterize an entire house with simple quarter-turn actions • SWT × IPS option designed specifically for use with pre-fabricated threaded headers • Reversible handle for added versatility Draining from Above Ball Draining from Below Ball • Exclusive adjustable flow path allows for draining from either
Adjustable Flow Path ADJUSTABLE Valves with the T-Flow Adjustable Flow Path may be quickly and easily reconfigured to drain from either side of the ball. Simply remove the handle, turn the stem 180°, and replace the handle.
• Eliminates assemblies needed for installing drains into a line • Install anywhere a drain or purge valve is required • Hi-flow alternative for filling, draining, or venting closed-loop hydronic systems • Add a garden hose connection to any water source in lines up to 2" • Guaranteed for Life THE OLD WAY AVAIL ABLE W/ REPLACES 2 COMPONENTS ELIMINATES 1 LEAK PATH SAVES 9 MINUTES OF LABOR HANDLE OPERATION Normal Operation T-DRAIN™ Full Port Forged Brass Fitting w/ Hi-Flow Hose Drain System Purging 600 W
THE OLD WAY On Off Ball Valve REPLACES 7 COMPONENTS ELIMINATES 6 LEAK PATHS SAVES 54 MINUTES OF LABOR • The 3-way ball controls flow between the expansion tank and the system • Easily install, isolate, drain & replace any expansion tank • Quickly connect entire system to the cold water feed • Guaranteed for Life HANDLE OPERATION SUPPLY FEED SUPPLY FEED Normal Operation System Isolation & Tank Draining EXPANSION TANK PRO SERVICE VALVE™ Full Port Forged Brass Ball Valves w/ Hi-Flow Hose Drain SIZE
• Simultaneously drain, flush & refill any hydronic, solar, or closed loop system • T-pattern flow path quickly and easily prevents the flow between the two hose connections THE OLD WAY REPLACES 7 COMPONENTS ELIMINATES 6 LEAK PATHS SAVES 54 MINUTES OF LABOR On Off Ball Valve • As fluid is introduced into the system, the existing fluid or air is diverted out of the system through the remaining hose connection • Reversible handle for added versatility • Guaranteed for Life HANDLE OPERATION COMPACT Normal Op
THE OLD WAY On Off Ball Valve REPLACES 5 COMPONENTS* ELIMINATES 4 LEAK PATHS SAVES 36 MINUTES OF LABOR • Allows for placement of a ball valve between closely spaced tees • Precision crafting achieves hydraulic separation • Permits power purging of individual loops in hydronic systems *Correct spacing for hydraulic separation cannot be achieved using off-the-shelf components. The Purge Tee is the ONLY way to place a valve between closely spaced tees. PERIOD.
WHERE WOULD YOU USE WEBSTONE? SPARE L HIGH TEMP CONTROL PANEL L C D LOW TEMP RADIANT FLOOR PANEL BASEBOARD HEATER E D M D Temperature Gauge SPARE SPARE M I F I K D Heat Exchanger L L SPARE A D SNOWMELT ZONE G SUPPLY FEED F Pressure Reducing Valve Backflow Preventer Expansion Tank J F Return F A F Supply H INDIRECT WATER HEATER LOW TEMP RADIANT FLOOR MANIFOLD C B F BOILER A Hydro-Core™ Manifold B C D E F G H I J K L M Hydro-Core™ Complete Near Boiler Piping Kit Isola
