Brochure

Page 20
Job/Customer ___________________________________________ Date _________________________ Contractor ______________________________________
Model Specifi ed __________________________________________ Qty __________________________ Approved By_____________________________________
Designer/Engineer _______________________________________ Date _________________________ Contractor’s PO# ________________________________
Submitted by ____________________________________________ Date _________________________ Other ___________________________________________
THIS SPACE FOR DESIGNER / ENGINEER APPROVAL
Pro-Pal
®
Purge & Fill
Full Port Forged Brass Ball Valves
w/ (2) Hi-Flow Hose Drains
4861 Series - IPS
4861 Series - IPS
5861 Series - SWT
5861 Series - SWT
600 WOG
ISO 9001
Patents Pending
ITEM# SIZE CTN/CASE A B C D E F
48613 3⁄4" 1/12 3/4 3 15/16 2 1/8 3 7/8 2 3/8 1/2
48614 1" 1/12 1 4 5/16 2 9/16 4 5/8 2 9/16 1/2
48615 1 1 ⁄4" 1/12 1 1/4 4 7/8 2 7/8 4 5/8 2 15/16 3/4
48616 1 1 ⁄2" 1/12 1 1/2 5 1/16 3 7/16 5 9/16 3 1/6 3/4
ITEM# SIZE CTN/CASE A B C D E F
58613 3⁄4" 1/12 3/4 4 5/16 2 1/8 3 7/8 2 3/8 1/2
58614 1" 1/12 1 4 3/4 2 9/16 4 5/8 2 5/8 1/2
58615 1 1⁄4" 1/12 1 1/4 5 1/2 2 7/8 4 5/8 3 3/4
58616 1 1⁄2" 1/12 1 1/2 6 3 7/16 5 9/16 3 1/2 3/4
TEMP °F PSI
100 600
150 490
200 470
250 439
300 411
350 294
366 N/A
TEMP °F PSI
100 600
150 485
200 395
250 210
300 N/A
350 N/A
366 N/A
NO. DESCRIPTION MATERIAL
1BODY BRASS
2END CAP BRASS
3SEAT PTFE
4BALL BRASS HCP
5STEM BRASS
6STEM SEAL PTFE
7PACKING GLANDBRASS
8 HANDLE NUT STAINLESS STEEL
9 HANDLE STEEL CP
10 HANDLE JACKET VINYL
11 DRAIN END CAP BRASS
12 DRAIN SEAT PTFE
13 DRAIN BALL BRASS HCP
14 DRAIN STEM BRASS
15 DRAIN STEM SEAL PTFE
16 DRAIN PACKING BRASS
17 DRAIN VALVE
HANDLE
ENAMEL COATED
ALUMINUM
18 DRAIN VALVE BRASS
19 CAP & STRAP BRASS W/ EPDM
HOSE WASHER
A
B
D
23 4
9101
C
E
F
56 7 8
16 18
17
1514
19
11
12
13
Speci cations: Suitable for residential, commercial or industrial use with water or oil, this valve was speci cally designed for  lling and draining glycol/antifreeze from any point in a
hydronic system. This approved Webstone valve is actuated by a blowout proof stem and features an adjustable packing gland. Threaded ends comply with ANSI B1.20.1. Solder joint
temperature ratings are per ASME B16.18 Annex A for 95-5 solder. Other solder materials have lower pressure/temperature limits. Do not silver braze or overheat valves when soldering.