Brochure

Page 26
Job/Customer ___________________________________________ Date _________________________ Contractor ______________________________________
Model Specifi ed __________________________________________ Qty __________________________ Approved By_____________________________________
Designer/Engineer _______________________________________ Date _________________________ Contractor’s PO# ________________________________
Submitted by ____________________________________________ Date _________________________ Other ___________________________________________
THIS SPACE FOR DESIGNER / ENGINEER APPROVAL
Standard Port Forged Brass Ball Valves
4182 Series - IPS
4182 Series - IPS
5182 Series - C×C
5182 Series - C×C
400 WOG / 125 WSP
ISO 9001
D
C
A
B
1
6
5
7
9
8
10
2
3 4
ITEM # SIZE CTN/CASE A B C D C
V
41820 1⁄4" 10/120 1/4 1 11/16 1 1/2 3 3/8 7.5
41821 3⁄8" 10/120 3/8 1 11/16 1 1/2 3 3/8 7.7
41822 1⁄ 2" 10/120 1/2 1 15/16 1 5/8 3 3/8 7.9
41823 3⁄4" 10/80 3/4 2 1/4 1 3/4 3 3/8 14.2
41824 1" 6/48 1 2 5/8 2 1/16 4 3/4 32.3
41825 1 1⁄4" 4/32 1 1/4 3 2 1/4 4 3/4 59.8
41826 1 1⁄2" 2/24 1 1/2 3 1/2 2 3/4 5 1/4 118.7
41827 2" 2 /16 2 3 7/8 2 7/8 5 1/4 158 . 9
41828 2 1⁄ 2" 2/4 2 1/2 4 5/8 4 1/2 9 1/2 186.1
41829 3" 1/3 3 5 5/8 5 9 1/2 342.3
41830 4" 1/2 4 6 3/4 5 9 1/2 511.1
ITEM # SIZE CTN/CASE A B C D C
V
51822 1⁄2" 10/120 1/2 2 1/8 1 5/8 3 1/4 7.9
51823 3⁄4" 10/80 3/4 2 3/4 1 3/4 3 1/4 14.3
51824 1" 6/48 1 3 2 1/4 3 5/8 32.3
51825 1 1⁄4" 4/48 1 1/4 3 5/16 2 5/16 3 5/8 59.8
51826 1 1 ⁄2" 2/32 1 1/2 4 3/8 2 3/4 5 3/8 118.7
51827 2" 2/20 2 4 7/8 3 1/4 5 3/8 157.9
NO. DESCRIPTION MATERIAL
1BODY BRASS
2END CAP BRASS
3SEAT PTFE
4BALL BRASS HCP
5STEM BRASS
6STEM SEAL PTFE
7PACKING GLAND BRASS
8 HANDLE STEEL CP
9 HANDLE NUT STEEL CP
10 HANDLE JACKET VINYL
TEMP °F PSI
100 400
150 327
200 313
250 293
300 274
350 196
366 N/A
TEMP °F PSI
100 400
150 327
200 313
250 210
300 N/A
350 N/A
366 N/A
Speci cations: Designed for residential, commercial or industrial use with water, oil or gas. This approved Webstone valve is actuated by a blowout proof
stem and features an adjustable packing gland. Threaded ends comply with ANSI B1.20.1. Solder joint temperature ratings are per ASME B16.18 Annex
A for 95-5 solder. Other solder materials have lower pressure/temperature limits. Do not silver braze or overheat valves when soldering.