Brochure
Page 39
Job/Customer ___________________________________________ Date _________________________ Contractor ______________________________________
Model Specifi ed __________________________________________ Qty __________________________ Approved By_____________________________________
Designer/Engineer _______________________________________ Date _________________________ Contractor’s PO# ________________________________
Submitted by ____________________________________________ Date _________________________ Other ___________________________________________
THIS SPACE FOR DESIGNER / ENGINEER APPROVAL
Full Port Forged Brass Mini Ball Valves
Petcock Style
600 WOG / 125 WSP
ISO 9001
4168 Series - FIP × MIP
4168 Series - FIP × MIP
ITEM # SIZE CTN/CASE A B C D
41685 1 ⁄ 8" × 1 ⁄8" 10/100 1/8 1 13/16 1 1/8 1 3/4
41686 1⁄4" × 1 ⁄8" 10/100 1/8 1 13/16 1 1/8 1 3/4
41687 1⁄4" × 1 ⁄4" 10/100 1/4 1 15/16 1 1/8 1 3/4
NO. DESCRIPTION MATERIAL
1BODY BRASS
2END CAP BRASS
3SEAT PTFE
4BALL BRASS HCP
5STEM BRASS
6STEM SEAL FKM
7PACKING BRASS
8 HANDLE STEEL CP
9 HANDLE NUT STEEL CP
10 HANDLE JACKET VINYL
TEMP °F PSI
100 600
150 490
200 470
250 439
300 411
350 294
366 N/A
D
10
8 9
7
6
3 4
2
5
C
A
B
1
Speci cations: Designed for commercial
or industrial use with water, oil or gas.
This approved Webstone valve is actuated
by a blowout proof stem. Threaded
ends comply with ANSI B1.20.1
Full Port Forged Brass Mini Ball Valves
Petcock Style
600 WOG / 125 WSP
ISO 9001
4169 Series - FIP × FIP
4169 Series - FIP × FIP
ITEM # SIZE CTN/CASE A B C D
41698 1 ⁄ 8" × 1 ⁄8" 10/100 1/8 1 5/8 1 1/8 1 3/4
41699 1 ⁄4" × 1 ⁄4" 10/100 1/4 1 5/8 1 1/8 1 3/4
TEMP °F PSI
100 600
150 490
200 470
250 439
300 411
350 294
366 N/A
NO. DESCRIPTION MATERIAL
1BODY BRASS
2END CAP BRASS
3SEAT PTFE
4BALL BRASS HCP
5STEM BRASS
6STEM SEAL FKM
7PACKING BRASS
8 HANDLE STEEL CP
9 HANDLE NUT STEEL CP
10 HANDLE JACKET VINYL
D
10
8
9
7
6
3 4
2
5
C
A
B
1
Speci cations: Designed for commercial
or industrial use with water, oil or gas.
This approved Webstone valve is actuated
by a blowout proof stem. Threaded
ends comply with ANSI B1.20.1