Brochure
Page 41
Job/Customer ___________________________________________ Date _________________________ Contractor ______________________________________
Model Specifi ed __________________________________________ Qty __________________________ Approved By_____________________________________
Designer/Engineer _______________________________________ Date _________________________ Contractor’s PO# ________________________________
Submitted by ____________________________________________ Date _________________________ Other ___________________________________________
THIS SPACE FOR DESIGNER / ENGINEER APPROVAL
Forged Brass Gas Ball Valves
Non CSA Applications 600 WOG
ISO 9001
2256 Series - IPS
2256 Series - IPS
ITEM # SIZE CTN/CASE A B C D
22561 3⁄ 8" 12/144 1/8 1 3/4 1 3/8 1 3/8
22562 1⁄2" 12/144 1/8 2 1/4 1 3/8 1 3/8
22563 3⁄4" 12/144 1/4 2 3/8 1 3/8 1 3/8
NO. DESCRIPTION MATERIAL
1BODY BRASS
2END CAP BRASS
3SEATS PTFE
4BALL BRASS HCP
5STEM BRASS
6THRUST WASHERPTFE
7STEM SEAL PTFE
8PACKING GLANDBRASS
9 LEVER HANDLE ZINC W/ EPOXY COATING
10 SCREW BRASS
TEMP °F PSI
100 600
150 490
200 470
250 439
300 411
350 294
366 N/A
CSA Approved Class 3371-12
5 PSIG Maximum for Gas
Appliance Inlet Connection
CSA Approved Class 3371-88
1 ⁄ 2 PSIG Maximum for Gas
Appliance Pilot Shutoff
5
10
9
D
C
8
7
6
2
4
B
A
13
Speci cations: Designed for use with natural, manufactured,
mixed lique ed petroleum and LP gas/air mixtures.
This approved Webstone valve is actuated by a blowout
proof stem. This valve complies with ANSI 2.21.15 for
use as a gas appliance connector valve for a 1⁄ 2 lb
system. Threaded ends comply with ANSI B1.20.1.
Forged Brass Gas Ball Valves
1 ⁄2 to 175 WOG
ISO 9001
2252 & 2152 Series - Flare × FIP
2252 & 2152 Series - Flare × FIP
ITEM # SIZE CTN/CASE A B C D
22521 3⁄ 8" × 1⁄ 2" 10/120 3/4 2 3/4 1 3/4 1 3/4
22522 1 ⁄2" × 1 ⁄2" 10/100 1/2 2 5/8 1 1/8 1 1/3
21526 5⁄8" × 3⁄4" 6/96 1/2 2 5/8 1 1/4 1 1/8
NO. DESCRIPTION MATERIAL
1BODY BRASS
2END CAP BRASS
3SEATS PTFE
4BALL BRASS HCP
5STEM BRASS
6STEM SEAL PTFE
7PACKING GLAND BRASS
8 LEVER HANDLE ZINC W/ EPOXY
COATING
9SCREW BRASS
TEMP °F PSI
100 175
150 175
200 175
250 175
300 175
350 175
366 175
Speci cations: Designed for use with natural,
manufactured, mixed lique ed petroleum and LP gas/
air mixtures. The 22521 and 22522 are each actuated
by a blowout proof stem. This valve complies with ANSI
2.21.15 for use as a gas appliance connector valve for a
1/2 lb system. Threaded ends comply with ANSI B1.20.1.
6
7
8
5
9
10
D
C
A
1
34
2
B