Product Overview

Job/Customer ______________________________________ Date ______________________ Contractor _________________________________
Model Specied ____________________________________ Qty _______________________ Approved By ________________________________
Designer/Engineer __________________________________ Date ______________________ Contractor’s PO# ____________________________
Submitted by _______________________________________ Date ______________________ Other ______________________________________
THIS SPACE FOR DESIGNER/ ENGINEER APPROVAL
50682
FORGED BRASS BALL VALVES
W/ WING HANDLE
SWT x PEX
160 WOG
NO. DESCRIPTION MATERIAL
1 body brass
2 end cap brass
3 seat ptfe
4 ball brass hcp
5 stem brass
6 stem seal rubber
7 handle steel cp
8 handle jacket vinyl
9 handle nut steelp cp
ITEM # SIZE P/CARTON P/CASE A B C D E
50682 1/2” 10 60 1/2 2 3/8 1 11/16 2 3/8 3/8
5068spec_060209
TEMP ºF WOG
73.4 160
180 100
200 80
Tel: [phone] • Fax [phone]
Webstone product specications in U.S. customary units are approximate and are provided for reference only. Webstone reserves the right to change or modify product design, construction, specications
or materials without prior notice and without incurring any obligation to make such changes and modications on Webstone products previously or subsequently sold.
Specications: Designed for residential, commercial or industrial use with water, oil or gas. This approved Webstone Valve is actuated by a blowout proof stem
and features an adjustable packing gland. Solder joint temperature ratings are per ASME B16.18 Annex A for 95-5 solder. Other solder materials have lower
pressure/temperature limits. Do not silver braze or over heat valves when soldering.
PEX temperature and pressure
limits ASTM F876.