Submittal Sheet

7500-V.xlsmspec_3/29/2018
7500-V Series
Forged Brass Air Separator
w/ Removable Vent Head & Coalescing Medium
For Vertical Installations
Max Operating Pressure: 150 PSI
ITEM# SIZE (in) CTN CASE A B C D E F G H
H-75003-V 0.75 1 8 6.32 9.96 5.18 11.38 0.75 2.36 0.00 0.00
H-75004-V 1 1 8 6.32 10.20 5.18 11.50 0.91 2.36 0.00 0.00
TRUE
NO. DESCRIPTION MATERIAL
1 MAIN BODY BRASS
2 WIRE MESH STAINLESS STEEL
3 BAFFLE STAINLESS STEEL
4 FLOAT ALIGNMENT PIN BRASS
5 BODY O-RING EPDM
6 UPPER BODY BRASS
7 FLOAT PP
8 FIXED LINK STAINLESS STEEL
9 BODY CAP RING BRASS
10 BODY CAP O-RING EPDM
11 VENT/FLOAT ARM STAINLESS STEEL
12 BODY CAP BRASS
13 SNAP RING STAINLESS STEEL
14 VENT BRACKET STAINLESS STEEL
15 VENT O-RING EPDM
16 VENT PIN BRASS
17 VENT SPRING STAINLESS STEEL
18 VENT LOCATING NUT BRASS
19 VENT CAP WASHER EPDM
20 VENT CAP BRASS
21 SWT UNION FITTING LEAD FREE BRASS
22 RETAINING RING* STAINLESS STEEL
23 UNION WASHER EPDM
24 UNION NUT BRASS
25 END CAP BRASS
TRUE
TRUE
Specifications: Designed for residential, commercial or industrial use to extract micro
bubbles and static air from a hydronic heating system. The Air Separator must be
installed in a straight run of vertical piping. Designated lengths of straight piping before
and after the unit are not required. Neither side is designated as an inlet or outlet; the
flow may be directed in either direction. Solder joint temperature ratings are per ASME
B16.18 Annex A for 95-5 solder. Other solder materials have lower pressure /
temperature limits. Remove EPDM gaskets before soldering. Do not silver braze or
overheat fittings when soldering.
SWT
FALSE
FALSE
FALSE