Submittal Sheet

7800-V.xlsmspec_3/29/2018
7800-V Series
Forged Brass Air Separator
w/ Removable Vent Head & Coalescing Medium
For Vertical Installations
Max Operating Pressure: 150 PSI
ITEM# SIZE (in) CTN CASE A B C D E F G H
H-78003-V 0.75 1 8 6.32 10.55 5.18 11.67 1.02 2.36 0.00 0.00
H-78004-V 1 1 8 6.32 10.55 5.18 11.67 1.02 2.36 0.00 0.00
TRUE
NO. DESCRIPTION MATERIAL
1 MAIN BODY BRASS
2 WIRE MESH STAINLESS STEEL
3 BAFFLE STAINLESS STEEL
4 FLOAT ALIGNMENT PIN BRASS
5 BODY O-RING EPDM
6 UPPER BODY BRASS
7 FLOAT PP
8 FIXED LINK STAINLESS STEEL
9 BODY CAP RING BRASS
10 BODY CAP O-RING EPDM
11 VENT/FLOAT ARM STAINLESS STEEL
12 BODY CAP BRASS
13 SNAP RING STAINLESS STEEL
14 VENT BRACKET STAINLESS STEEL
15 VENT O-RING EPDM
16 VENT PIN BRASS
17 VENT SPRING STAINLESS STEEL
18 VENT LOCATING NUT BRASS
19 VENT CAP WASHER EPDM
20 VENT CAP BRASS
21 PRESS UNION FITTING LEAD FREE BRASS
22 O-Ring EPDM
23 RETAINING RING STAINLESS STEEL
24 UNION WASHER EPDM
25 UNION NUT BRASS
TRUE
TRUE
Press
Specifications: Designed for residential, commercial or industrial use to
extract micro bubbles and static air from a hydronic heating system. The
Air Separator must be installed in a straight run of vertical piping.
Designated lengths of straight piping before and after the unit are not
required. Neither side is designated as an inlet or outlet; the flow may
be directed in either direction.
FALSEFALSE
FALSE