User's Manual

8
Charging the Battery
Information & Procedure
The craft’s battery must be charged before it can be flown. Before charging, be sure
the craft and remote control are powered OFF to avoid risk of injury or damage. It is
recommended to remove the battery from the craft when charging. Charging time is
approximately 60 minutes. Charge fully before use for best performance.
Connect the USB charging cable (included) to the USB port of a powered ON computer or
USB power adapter (not included), then connect the charging plug to the battery plug.
While charging, the cable will display a red light.
When charging is complete, the light will turn OFF.
Be sure to correctly match the plug to the charging
port or damage may occur.
REMINDER: Do not charge overnight. Do not leave
unattended while charging.