User's Manual

Pre-Flight Calibration

Step 4

Push the Left Control Stick directly

forward, wait for a chime to sound, then

pull the stick directly backward, and wait

for a second chime.

When this last chime has sounded,

the craft is calibrated and ready to y.

Step 5

Attempt a stable hover, low to the

surface you started on. If you notice

a tendency to drift, you may need to

adjust the trim controls to ne tune the

handling (see Trim Adjustment, pg.15).

When You’re Done Flying...

After safely landing, keep the throttle in the lowest position (OFF) and wait for the

rotors to stop spinning. Power OFF the remote rst. This will ensure that no signals

are accidentally sent to the craft, reducing the chance of injury. After this is done, it is

safe to pick up and power OFF the craft.