User's Manual

Trim Adjustment

Setting Trim & Countering Drift

Even after the craft is calibrated, it may show a tendency to drift while airborne.

Adjusting the trim will help counter this effect and allow you to better control the

craft. To avoid potential damage, adjust the trim while in a stable hover, and do not

make any sudden movements with the ight controls. Adjust one trim setting at a

time to avoid confusion.

Remember, the red LEDs /red rotors indicate the front of the craft.

While adjusting the trim will help with drift, it is not guaranteed to eliminate it

entirely. Physical, mechanical, and environmental factors (ex: a gust of wind) may

still inuence the craft’s direction and ight..

Drift Type Solution

Craft yaws/spins in place. Adjust Yaw Trim.