User's Manual

Repair

Rotor Replacement

The craft comes with 4 replacement rotors, to be used if the originals are broken or

badly damaged.

To replace a rotor, use a small Phillips head screwdriver (included) and remove the

screw connecting the rotor to the electric motor shaft. Remove the damaged rotor

and replace it with a new one, then screw it back into place on the motor shaft,

taking special care not to bend or break the shaft.

REMINDER: The rotors are marked A or B on the underside of the rotor. It is

extremely important to use the correct rotor for replacement. Mismatching the

rotor will cause the craft’s ight to be erratic and difcult to control.

REMINDER: Pilots are responsible for any damage caused by improper use.