Technical Handbook Building and Waterproofing Custom Tiled Showers August 2020 Catalog US CA wedicorp.
Table of Contents 01 What is wedi? wedi System Composition.................6 02 Selecting the right products for your wedi shower wedi 4-Step Process........................10 03 Point drain shower systems wedi Fundo Primo...........................20 Product information and installation instructions Step 1: Choose a shower base........12 wedi Fundo Ligno (curbless access), Primo (offset and center location point drain) and Riolito wedi Fundo Ligno...........................
To make things easier: The wedi range has been rearranged and is now divided into 9 sections. Technical, Pricing and Warranty information can now be found at the back of the book starting at page 108. 04 Linear shower systems 05 Building Panel Systems 06 Prefabricated modules wedi Fundo Riolito neo...................42 Product information and installation instructions wedi Building Panels.......................58 Sanoasa Benches 1-4......................
wedi Subliner® Dry Waterproof Sheet Membrane wedi systems create the structure and substrate for tiled showers and bathrooms wedi offers a product system consisting of shower floor elements with integrated drainage, tile backer/wall panels, curb and seat structures, wall niches, sealants and many more accessories. The products can be combined to complete installation kits, and they are installed over framed and solid substructures.
wedi Building Panel wedi Shower Niche wedi Sanoasa® Bench wedi Fundo Ligno® Shower Base Initial situation During renovation Complete solution with wedi 5
01 What is wedi? wedi shower floors and wall building panels as well as most of wedi’s foam core based product systems are comprised of 3 main components: the XPS waterproof foam core, cement resin coating and fiberglass mesh reinforcement. All are important pieces that provide strength and rigidity to wedi products.
wedi Product Composition 01 03 02 01 XPS waterproof foam core 02 Cement resin coating 03 Fiberglass mesh reinforcement 7
04 05 03 01 02 wedi Building Panels and Shower Bases, whether you use them as a system or individually, are installed directly to framing or solid sub-floors or structures and provide you with a directly tilable surface.
wedi – What’s underneath your tile matters 01 wedi Building Panels and Shower Systems re- 05 wedi’s foam based products are made with ex- inforced cement resin surface offers a superior trusion agents in compliance with the Montreal bond surface to virtually any tile and stone or tile Protocol, helping to reduce Global Warming Po- adhesive. No delamination, no surprises. tential (GWP). The foam based products are made from 25% recycled content.
02 Selecting the right products for your wedi shower While many of the wedi shower systems are marketed as complete Kits in one box, you can also select from a wide range of a la carte product to assemble a complete custom shower design. Here, we’ll show you which products you will need to choose to create a shower floor, a shower wall, equip the shower with niches or benches, and which installation accessories are needed for the assembly.
wedi System in 4-Steps Part 1: Shower Bases Part 2: Building Panels wedi Waterproof Shower Systems offer reliable, cost-efficient solutions for constructing 100% waterproof and mold proof showers and are easy to install. wedi Building Panels are the ultimate and complete wet room tile backer board and often used within the range of wedi shower systems as well as on walls, floors, countertops and many more applications.
wedi Systems Assembly – Step 1 Choose your shower base wedi Fundo Primo® Shower Base (Offset or Center Location Point Drain) The original wedi Fundo: Robust, pre-sloped, waterproof, shower floor bases with 4 in. x 4 in. drain cover. Customizable on-site. Often installed over various types of subfloors and often used with curbs. For product options and pricing, visit page 140.
wedi System Assembly – Step 2 Choose your building panels wedi Building Panels wedi Vapor 85 Perfect waterproof tile backer board and substrate The wedi Vapor 85 Building Panel is used for for practically any wall, floor, ceiling application Steam Rooms and Steam Showers. For product in interior wet areas. Sizes and thicknesses can options and pricing, visit page 151. accommodate different projects and applications. For product options and pricing, visit page 152.
wedi System Assembly – Step 3 Choose your prefabricated modules wedi Shower Seats and Benches Prefabricated, slightly sloped bench options or simply built on site to fit using wedi 2 in. or 1 1/2 in. Building Panel. Additionally, suspended seat solutions, equipped with mounting bracket system for installation into existing framing. For product options and pricing, visit pages 148-150. wedi Shower Niches wedi Curbs and Ramps The perfect fit for all shower necessities.
wedi System Assembly – Step 4 Choose your installation accessories wedi Premium Drain Covers for Linear and Point Drainage Systems wedi Joint Sealant and Sealant 620 Our wedi Joint sealant is Indispensable in regular wedi Each of our shower floor bases comes with a fitting shower assemblies to seal and reinforce seams and drain unit. Fundo Primo, Ligno and Onestep also include connections, as well as waterproof fastener points. a standard drain cover set.
All you need in one box Ligno, Primo and Riolito Kits 01 02 03 16
The total shower solution One box, one price All you need to build a shower system ready for tile in one Kit box – selectively with point or linear drain One price for all you need for the shower structure- easily budgeted for cost and installation time All you need in a safe and protected box for simple and fast logistics and handling For a safe modular installation with option to field modify system components for custom tiled showers Installers and builders save time and money and are prot
03 Point drain shower systems wedi Waterproof Shower Systems offer reliable, cost-efficient solutions for constructing 100 % waterproof and mold proof showers. These systems are easy to install and open up a whole new world of design possibilities for showers, wet areas and baths. wedi Shower Systems blend the traditional values of design flexibility and robustness while offering the added benefits that come with state of the art material and manufacturing technologies.
the wedi Fundo Primo® the wedi Fundo Ligno The wedi Fundo Primo Shower System features a square drain cover point drain- Homeowners and builders increasingly favor shower spaces which can function age solution for fast and safe renovation and new construction installations. without a curb or would not require any build-up over existing floor areas Fundo Primo is internally waterproof due to its wedi XPS foam‘s closed cell struc- resulting in a step-up into the shower.
wedi Shower Kit – Primo® Full Shower System in a Box 05 01 04 02 03 All products needed to build a wedi Fundo Primo point drain shower are included and provide a single manufacturer warranty. Safe transportation in one box, easy estimating of product quantities needed. The shower floor units feature a strong and pre-sloped surface which can be tiled over immediately whether you choose mosaic size or large format tile.
wedi Fundo Primo Product Information These added values and its detail perfections eliminate the technical concerns in shower installations. However, this is not where wedi shower systems stop offering its added values. The wedi Fundo shower system adds to your productivity and enables you to provide real value to your customers.
wedi Fundo Primo® Installation Before Installation: H ave 2 × 4 blocking installed over bottom plate between studs along to support wedi Building Panel to shower base transition area. Subfloor is stable, even and load bearing, and meets deflection criteria of maximum L/360 as per IRC. Wooden or concrete structural substrates are dry and sufficiently load bearing considering live and dead load. Wood and Steel framing is sufficiently load bearing, plum and square.
05 06 07 08 Turn the Fundo base upside Tighten the gaskets firmly Skim coat the thinset ANSI 118.4 and comb through with a 1/4” × 1/4” down and apply the rubber to the bases‘ steel ring using (6.4 × 6.4 mm) notched trowel. Channels pointing to the entrance. and the fiber gasket. the locking nut. Make sure Trowel the thinset on the rear side of the Fundo again using a 1/4” × 1/4” the drain body is still safely (6.4 × 6.4 mm) notched trowel.
15 16 17 18 wedi Niches are installed in a cut out in the wedi wall and attached with A continuous 1/2” (12.7 mm) bead of sealant is set into the channel it‘s flange right into the center of 16” (406.4 mm) o.c. studs. wedi Joint and along the vertical curb notch part. A circle of 1/2” (12.7 mm) seal- Sealant is set along the connection of wall to niche.
wedi Drain Cover Assembly / Insertion Insert cover frame into base hole (no glue / no screws). You may caulk between part and tile to create a flexible grout joint. Optional Extension Collar can be cut to height if part is needed. The caulk joint must not create a water barrier damming up the water draining through the thinset bed into the drain from below the tile. Therefore the thinset layer must be continuous toward the drain.
wedi Shower Kit – Ligno® Full Shower System in a Box 05 01 03 04 02 All products needed to build a wedi walk-in point drain shower are included and provide a single manufacturer warranty. Safe transportation in one box, easy estimating of product quantities needed. To address all challenges for tile professionals, wedi engineered Fundo Ligno, a sloped shower base ¾” thin at its perimeter and available in various sizes. Fundo Ligno can be field modified.
wedi Fundo Ligno Product Information wedi Fundo Ligno is designed to provide for a low profile base thickness of only 3/4” (19 mm). This allows for a fast and flush installation into a subfloor assembly without cutting into floor joists. The system is designed to work without a curb. Enjoy the ease of installation without creating a structural hazard because you maintain the structural subfloor panels installed between floor joists under the wedi Fundo Ligno.
wedi Fundo Ligno® Installation Follow applicable state or local plumbing codes requiring specific and dimensioned waterproofed areas for a shower system or other wet room installation. Requirements in this manual supersede local Before Installation: plumbing codes; they extend and are not in conflict.
01 02 03 Cut 3/4 in. (19 mm) wood floor base out fitting the space of wedi Assemble the drain unit follow Set up a continuous 1/4” (6.4 Fundo Ligno. Safely install 2 in. × 6 in. (50.8 × 152.4 mm) blocking ing the instruction d rawing. mm) bead of wedi Joint Sealant along floor joists and in between floor joists where the perimeter of the along the top side of the wedi Ligno base will be located, install 2 in. × 6 in. (50.8 × 152.4 mm) block- Fundo‘s valve groove profile. ing 3/4 in.
08 09 10 11 Trowel the thinset on the rear side of the Fundo again using a 1/4” × Set up the rubber caulking 60 minutes after initial instal- 1/4” (6.4 × 6.4 mm) notched trowel. There are different ways to ensure gasket (with the beveled side lation of the drain with wedi good bond of the wedi Base to the subfloor. Required is a setting bed up) around the 2” (50.8 mm) Joint Sealant tighten (squeeze) thickness of min. 3/16“ (4.8 mm) and max. of 5/16“ (7.9 mm) (com- pipe in the subfloor.
15 16 17 wedi Niches are installed in a 2 Fasteners on each side of the Fill unused Ligno perimeter channels by sealing in wedi Panel strips cut out in the wedi wall and niche are set to create a flush (included in box). Prepare to install wedi Subliner Dry waterproofing attached with it‘s flange right transition to the wall panels. membrane over the subfloor outside the shower and reaching 4” into the center of 16” (406.4 Another 1/2” (12.7 mm) bead (101.
After Installation All visible joints or seams in the installation are fully covered and reinforced with wedi Joint Sealant applied flat over the seams. Coverage of wedi Joint Sealant over all seams should be at least 1” (25.4 mm) on either side of the seam. The wedi Joint Sealant should be no less than 1/16” (1.6 mm) thick for strength. Do not add mesh tape into the wedi Joint Sealant.
wedi Fundo Ligno® Recess Kit The Fundo Ligno Recess Installation Kit is designed to help you recess a wood floor between existing floor joists (2x10 joists, engineered or I joist construction) without the need of sistering these joists with more 2x6 or other wood framing material. It will add safety in terms of structural stability of the recess, but will also allow for a safe installation process, and save much time compared to working with framing material only.
04 05 06 07 Fasten the next bracket on the Repeat process shown under Place C brackets at the wall The C brackets are inserted other side of the floor joist. 4. and install joist brackets to sides. The C brackets are in- with their claws between floor Stagger the tabs, so you may all exposed joists. stalled at both ends of the recess surface and underside of the area first and then along the base plate.
14 15 16 Clean and degrease the bracket Place all wood strips into posi- Secure wood strips to C and Joist brackets using flat head Phillips support flanges/surfaces and tion on brackets. self-drilling screws with wings as provided by wedi. Fasten at mini- apply a 1/4“ (6.35 mm) bead mum every 10 (ten) inches where joist brackets are present, or where of wedi Joint Sealant. C brackets are in line along the framed wall and parallel to the floor Use wedi Joint Sealant or a joists.
wedi Fundo OneStep Shower System Product Information These added values and its detail perfections eliminate the technical concerns in shower installations. However, this is not where wedi shower systems stop offering its added values. The wedi Fundo shower system adds to your productivity and enables you to provide real value to your customers.
wedi OneStep Installation Before Installation: Subfloor is stable, even and load-bearing, and meets deflection criteria of maximum L/360 and requirements as per IRC. Wooden or concrete structural substrates are dry and sufficiently load-bearing considering live and dead load. Wood and Steel framing is sufficiently load-bearing, plum and square. Floor drain assembly below floor is stabilized, fixed and supported in position, and will not sink under water load.
After Installation All visible joints or seams in the installation are visibly covered and reinforced with wedi Joint Sealant applied flat over the seams. Coverage of wedi Joint Sealant over all seams should be at least 1 inch (25.4 mm) on either side of the seam. The wedi Joint Sealant should be no less than 1/16 inch (1.6 mm) thick for strength. Do not add mesh tape into the wedi Joint Sealant.
wedi Drain Cover Assembly / Insertion Insert cover frame into base hole (no glue / no screws). You may caulk between part and tile to create a flexible grout joint. Optional Extension Collar can be cut to height if part is needed. The caulk joint must not create a water barrier damming up the water draining through the thinset bed into the drain from below the tile. Therefore the thinset layer must be continuous toward the drain.
04 Linear shower systems Everything for the shower area with stylish linear drainage, optionally with the drainage channel close to the wall, at a distance from the wall or centrally positioned. In addition to the shower element, wedi offers matching drains and a wide variety of channel covers as standard, exclusive or tileable variants.
The wedi Fundo Riolito® neo wedi’s pre-sloped Fundo Riolito neo Shower Base features the only fully factory sealed and integrated linear drainage systems. The bases itself are naturally waterproof as well as mold proof, due to their closed cell XPS foam core. The Fundo Riolito neo bases come with the wedi typically strong and ready for tiling surface coating. All Fundo Riolito neo shower bases can be field modified. They can be cut to size or extended using wedi‘s pre-sloped Fundo extensions.
wedi Shower Kit – Riolito® Full Shower System in a Box 04 02 01 05 03 All products needed to build a wedi line drain shower are included and provide a single manufacturer warranty. Safe transportation in one box, easy estimating of product quantities needed. The unique wedi Fundo Riolito neo bases allow water to drain away through a narrow gap between their drains cover plate and the tile surface finish. wedi Fundo Riolito neo is always equipped with the drain unit but covers are ordered separately.
wedi Fundo Riolito neo Product Information Several models with 4-way slope fields provide for a perfect installation when recessing the base into a subfloor where a flush to the floor entry is required. The second option includes models with a true one way slope towards the linear drain. This latter option is especially designed to accommodate tub to shower conversions without the need to ever move the floor drain pipe.
wedi Fundo Riolito® neo Installation Before Installation: Have extra 2 × 4 blocking installed over bottom plate between studs along to support wedi Building Panel to shower base transition area. Subfloor is stable, even and load bearing, and meets deflection criteria of maximum L/360 and requirements as per IRC. Wooden or concrete structural substrates are dry and sufficiently load bearing considering live and dead load. Wood and Steel framing is sufficiently load bearing, plum and square.
05 06 07 08 Trowel the thinset on the rear side of the Fundo again using a 1/4” × 1/4” (6.4 Set up a continuous 1/2” (12.7 mm) bead of wedi Joint Sealant at the × 6.4 mm) notch trowel. Press the Fundo firmly into the thinset bed, ensuring perimeter channel and only in areas where you can immediately install a that the installation is level and void free. Do not bend or apply uneven pressure wedi Building Panel into the fresh sealant.
wedi Fundo Riolito neo Modular Linear Drain Shower Floor Solutions Component 2: Fundo Riolito neo Extension Module – 100% internally waterproof, mold proof, insulating wedi XPS closed cell foam core Component 1: Fundo Riolito neo Line Module – Multifunctional and customizable to the user‘s demands Drain to Base Assembly Building Panel Curb wedi Fundo Riolito neo Modular Sealing collar Screws Drain body The shower base may be extended using a pre-sloped wedi wedi shower bases thicker than 1 ½ in.
wedi Fundo Riolito® neo Modular Installation Before Installation: Have extra 2 × 4 blocking installed over bottom plate between studs along to support wedi Building Panel to shower base transition area. Subfloor is stable, even and load bearing, and meets deflection criteria of maximum L/360 and requirements as per IRC. Wooden or concrete structural substrates are dry and sufficiently load bearing considering live and dead load. Wood and Steel framing is sufficiently load bearing, plum and square.
05 06 Trowel the thinset on the rear side of the Fundo Riolitio neo Module without being disturbed (e.g. thinset bags). Ensure there is 100% thinset “Drain” again using a 1/4” × 1/4” (6.4 × 6.4 mm) notch trowel. supporting the drain channel area over a completely flat subfloor. This may Press the Fundo Riolito neo Module “Line Drain“ into the thinset so that the break the units seals.
After Installation All visible joints or seams in the installation are fully covered and reinforced with wedi Joint Sealant applied flat over the seams. Coverage of wedi Joint Sealant over all seams should be at least 1” (25.4 mm) on either side of the seam. The wedi Joint Sealant should be no less than 1/16” (1.6 mm) thick for strength. Do not add mesh tape into the wedi Joint Sealant.
Linear channel cover standard and exclusive CLICK! 01 02 3/16" – 1" 03 04 × = compressed thinset plus tile thickness + 1 mm.
Linear channel cover tileable X+1 mm 01 3/16" – 1" 02 03 04 07 08 × = compressed thinset plus tile thickness + 1 mm.
wedi Fundo Riolito neo Channel Frame 01 02 Remove the protective film. 03 04 Connect the corners if not already assembled. 05 09 Install profile which is now resting 06 07 08 Use the foam block (provided) as a Apply thinset mortar to support spacer for thinset mortar. the profile at desired height. 10 11 12 Fill in grout. Remove the foam block spacer. on the thinset mortar.
Partition wall build from wedi Building Panel XXL without need for framework support Fundo Discreto – built into wedi Sanoasa bench and positioned over a Fundo Riolito floor base wedi Fundo Discreto® The wedi Fundo Discreto, the world’s first vertical drain cover system panel that can be built into double walls or wedi made seats, steps, shelving or foot rests and can be installed over fitting wedi Fundo Riolito neo channel drain systems.
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 ≥ 1 mm 17 18 05 19 06 20 21 22 23 24 55
05 Building Panel systems The wedi Building Panel combines the benefits of the latest manufacturing technology and material quality with sound and traditional benefits our trades enjoy. wedi Building Panels are waterproof, lightweight, easy and clean to cut and still incredibly strong and bond friendly for use with any type of thinset mortar application. The wedi Building Panel can be tiled with all types of ceramic, glass or stone tile whether they are mosaic or large format tiles.
wedi Vapor 85 For steam rooms with heaviest water and vapor exposure, the wedi Vapor 85 line is both a clean and fast to install building panel type construction system. It also provides integrated water and vapor proofing throughout the entire assembly system. wedi Building Panel – Shower Walls/Wet Areas and Floors wedi Building Panels can be applied to shower walls and wet areas perpendicular or parallel to the framing, saving time and reducing joint frequency.
wedi high load XPS foam – 100% waterproof Building Panel Applications - The Ultimate Tile Backer Board wedi Building Panels have a blue core made from extruded polystyrene rigid foam. The foam core is formed by a closed cell matrix, making the wedi Building Panel strong and internally waterproof. The foam core also retards water vapor but cannot form a vapor barrier suitable in tiled steam rooms. The foam core provides insulation value.
wedi Building Panel (incl. wedi Vapor 85) General Requirements Do not use where substrate is subject to excessive moisture and moisture content changes. A wedi installation does not replace the need for Expansion and/ or Movement joint placement within a tile installation. Please follow 1/2” (12.7 mm), 5/8” (15.9 mm) or 1” (25.
Possible Wall Surface Coverings over wedi Building Panels Ceramic, Stone and Glass Coverings Mosaic accent strips Ceramic coverings offer various possibilities for wall and floor design. wedi’s 1/8” (3.2 mm) Building Panel can be used to perfectly install Depending on the intended use and personal taste, there is a wide mosaic accent strips into a large format wall tile assembly. This helps variety of tile in different shapes, colors and materials.
wedi Building Panels over Framed Walls Whether in wet or dry areas, wedi Building Panels install perfectly well over wood or metal framed wall construction. The wedi Building Panels combine lightweight properties with a flexible strength and the right and proportionate stiffness of a real tile backer board. When tile is installed, the wedi Building Panel does not push in easily. After the installation, it will not succumb under any ordinary tile or stone weight.
wedi Building Panels over Framed Walls Installation 01 02 Using only a utility knife, wedi A continuous 1/2” (12.7 mm) Building Panels are effortlessly bead of wedi Joint Sealant is cut and shaped. applied on the foam edges of a wedi Building Panel before another panel is joined by butting tightly. 03 04 05 Apply 1 wedi fastener per All excess wedi sealant is spread Alternatively, wedi sealing tape can be used instead of the wedi Joint every 12” (304.
wedi Building Panels over Suspended Ceilings The lightweight, yet extremely strong performance of the wedi Building Panel, as well as its perfectly flat surface and installation, makes it a superior backing substrate for tiles over solid or suspended, framed ceilings. Especially valuable if used in areas subject to rising water vapor such as in pool areas. When working over head, not only the lightweight handling is of great benefit. Not being permanently covered in falling dust is another nice benefit.
wedi Building Panels over Tub and Tray walls and decks wedi Building Panels are the natural choice for use with tub or tray walls and tub enclosures. The panels can be installed directly to framing or over gypsum board, cement board, or directly to solid wood or concrete structures to create a waterproof underlayment for tile. They can be easily scored and shaped to provide radius surfaces on tub skirts and do not scratch tubs or fixtures during installation.
wedi Building Panels over Tub Wall Surround Application 01 02 03 04 Measure and cut awedi Building Attach a notched panel to the Apply a continuous 1/2“ (12.7 mm) bead of wedi Joint Sealant on the Panels to fit the 16” (406.4 mm) framework with a 1/2” (12.7 mm) top blue foam edge of the wedi Building Panel before installing the next o.c. framework (wood or metal). bead of wedi Joint Sealant be- panel, butting tightly into the sealant.
wedi Tub Sealing Tape with waterproof Butyl connection strip for waterproof connections between tubs/trays without nailing flange and wall assemblies 01 02 03 04 Ensure the installation site is Dry fit the length of the wedi Cut off any tape exceeding the Apply two continuous 1/2” clean, and all structures are even, tape needed to cover all three three sided perimeter of the tub (12.7 mm) beads of wedi Joint plumb, square and load bearing. sides of the tub or tray. Then re- or tray.
wedi Tub Sealing Tape with waterproof Butyl connection strip for waterproof connections between tubs/trays with partial nailing flange and wall assemblies 01 02 03 04 Ensure the installation site is Here, we install a tub with only Cut off any tape exceeding the Apply two continuous 1/2” clean, and all structures are even, one nailing flange along its back three sided perimeter of the tub (12.7 mm) beads of wedi Joint plumb, square and load bearing. side.
wedi 1/8 in. Building Panels under mosaic strips wedi’s 1/8” (3.2 mm) Building Panel can be used to perfectly install mosaic accent strips into a large format wall tile assembly. This helps avoiding excessive mortar build-up and leveling when trying to evenly align the field tile with the much thinner mosaic tile strip. The strips of wedi Building Panel could even be pre-tiled in the shop and simply adhered into the wall assembly on site, using thinset mortar applied to the back of the strip only.
Possible Floor Surface Coverings over wedi Building Panels On Floors: wedi under Ceramic and Stone Tile Coverings Virtually all mosaic and larger or thin tile formats, such as dimension stone or thin porcelain tile, can be installed over wedi Building Panels, which are an ideal carrier element and allow for easy and fast installation.
wedi Building Panels Over Structural Floors Whether it is in new construction or renovation, a great variety of subfloor types need a tile underlayment prior to setting tile or stone. Some of the reasons for the need to install tile underlayments include: they may reduce stresses from subfloors and protect tile; they may be used to build up height as needed to finish the tile surface flush with adjacent flooring surface; and they may be necessary for waterproofing or insulation purposes.
wedi Building Panel (incl. Preline) General Requirements use details specific to “Cementitious Coated Extruded Foam Backer Board”. wedi’s technical recommendations supersede all requirements of IRC,IBC, IPC or TCNA where in conflict and exceeding minimum requirements established by the above mentioned institutions. wedi Product Systems are only used for interior installations.
wedi Building Panels Over Wooden Subfloors wedi Building Panels are excellent underlayments for tile over interior wood subfloors. When applied over wood subfloors – wedi Building Panels act as a waterproof membrane and offer a superior bonding surface for tile. Additionally, the thermal insulating qualities of the panels support installations including floor warming systems under the tile covering. The ease of cutting and installing the wedi Building Panels make for a great renovating experience.
wedi Building Panels over Wooden Subfloor Installation All wedi Building Panel sizes and thicknesses can be used as tile underlayments over wood subfloors. A modified thinset mortar is applied to the floor with a 3/16“ (4.8 mm) to 1/4“ (6.4 mm) square notch trowel to provide a ribbed bed. The wedi Building Panels are then laid into the mortar. All joints should be staggered so that no seam continues throughout the length of the floor.
wedi Building Panels over Concrete Subfloors When installed over concrete, wedi Building Panels function as a crack-bridging underlayment, as cracks are not likely to transfer through the polystyrene core. The polystyrene foam also acts as a water barrier, when the seams are properly treated, making the system 100 % waterproof. The panels have excellent thermal insulation qualities, which is especially beneficial when used under floor warming systems.
wedi Building Panels Over structural floors and with Floor Heating Systems wedi Building Panels are ideal for use beneath floor heating systems whether you have a warm water heating or an electrical floor warming or heating system. The panel’s insulation properties isolate the heat from the substrate and guide it straight into the room which then saves energy and reduces warm-up time, as well as supports equal distribution of warmth.
Installation of Electric Floor Warming Systems using conventional wedi Building Panels The wedi Building Panels save time and money while conserving energy when used in conjunction with any common electric floor heating system. The extruded polystyrene foam core construction makes the system 100% waterproof and the perfect heat insulator and thermal barrier.
Installation of Hydronic / Water heating systems using wedi Preline and conventional wedi Building Panels wedi Building Panels are ideally suited for use beneath floor and even wall warming systems. The wedi Building Panels good insulation properties keep the heat away from the ground and reflect it back up in to the room, regardless of whether you have a hot-water heating system or an electric system. wedi Building Panels save energy and provide shorter warm-up times around your heating system.
Installation of Large Format Thin Porcelain Tile, and Other Tile/Stone, Over Countertops Installation Tips: w edi Building Panels starting with an panel thickness of 1 1/2“ (38.1 mm) can be used over counters without additional plywood support. The wedi Building Panels may overhang at the countertop edges by a maximum of 6” (152.4 mm) if overhang areas are tiled top, front and bottom. Some large or irregular shaped countertops will require multiple panels.
Custom designing and shaping with wedi Building Panel In a custom tiled wet area you may want to create specially shaped benches, seats, walls, tunnel shape ceilings, or shelf systems. wedi Building Panels open endless possibilities in the design of circular and other shapes. Whether you wish to achieve tight curves or semicircular solutions, the wedi Building Panel grants you plenty of scope to develop your ideas for virtually all applications.
wedi Vapor 85 for Steam Rooms and Steam Showers A special variant of the wedi Building Panel, wedi Vapor 85 is designed for the specific installation in steam showers and steam rooms. It will serve as a strong vapor retarder, by far exceeding the minimum requirements set by the Tile Council of North America (TCNA) for vapor retarders used in continuous use steam rooms. At the same time it offers all the benefits of the traditional and time tested wedi Building Panel: it’s light yet strong.
Installation of wedi Vapor 85 01 02 03 04 Ensure all framing and structures meet applicable wedi general require- All panels are butted tightly with wedi Sealant 620 continuously applied ments, building code and industry standards. Attach Vapor 85 panels to between all contact seams. Excess sealant is spread flat with a putty wall horizontally, and start the fasteners 1 ft. (304.8 mm) above shower knife. Use only wedi’s flat washers so the membrane is not twisted floor.
Introduction to Steam Rooms and Steam Showers Steam Showers and Steam Rooms are not only great places to relax and be healthy. For the professional installer, they are also a special challenge and great opportunity alike. a.
Equipment for steam rooms include a steam generator, closely located to the unit. It will produce the water vapor, which is forced into the room through an insulated copper pipe led through the wall in an area no less but also no higher than 12” (304.8 mm) of the steam room floor . The copper pipe should be as short and as straight as possible for optimal performance. Condensation may collect in pipe elbows or angles.
H2O in its gaseous form (vapor) can penetrate conventional waterproofing membranes. These membranes are designed to withstand penetration of water in its liquid form. Liquid, plain water presents a larger and tighter mass of H2O molecules and is a less energetic unit in comparison.
is Vapor 85, our wedi Building Panel with Subliner Dry factory applied to one side. Naturally, wedi’s product systems are not supporting mold growth. With one system, the entire interior tileable surface is now created and sealed tight right below the level of tile and setting materials. wedi’s vapor barrier successfully retards all water vapor targeting it and it is the direct bond surface for tile.
There always remains a risk that the potential seal and adhesion of grout to tile edge offers gaps. Do not rely on tile or setting material to function as a way of water or water vapor proofing. It remains, however, best practice and is important, to choose a most fitting combination of setting materials and surface finish systems that are made to endure in submerged and water vapor exposed, high temperature and abrupt temperature change environment and work with each other in this climate.
This requires setting over clean, flat, even, square and plumb surfaces which are best created and secured when at the framing or subfloor preparation state. Important is good thinset mortar transfer to the tile even if mesh backed (with a mesh safe in submersed applications and unaffected by alkalis present in mortars). Grout should be tightly packed. Setting materials must be given time to fully cure before a steam room is used. Ensure the manufacturers recommendations incl.
06 Prefabricated modules These wedi design elements in a wide variety of shapes offer innumerable style and functional design options. The range of wedi prefabricated modules include options for shower benches and seats, both, wall suspended and floor mounted. For wellness and spa wet areas wedi offers loungers and benches with optional head- and armrests, recess wall niches.
wedi Sanoasa Shower Benches wedi Sanoasa benches smart construction enables an unequal freedom of visual design; both the seating areas and the carrier elements can not only be positioned the way you like, but also their shapes and sizes can be modified to suit.
How to install wedi Sanoasa Benches 1-3 wedi Sanoasa Benches 1-3 offer great design solutions for smaller shower spaces and can be installed into newly built showers or as retrofits. They fit right in with wedi Shower Systems and may work in conventional shower systems as well. The benches come in two parts, the top/seat and bench support.
How to install wedi Sanoasa Bench 4 The Sanoasa 4 is a suspended bench that allows a design creating more space in any shower while adding seating comfort. The Sanoasa 4 is 3 1/8 in. thick and 47 1/4 in. long. The bench comes pre-sloped on its surfaces so water can safety run off to the front of the seat where it can move towards the shower drain instead of causing puddles on the bench tiles. The Sanoasa 4 can be cut to a shorter length and made to fit between three shower walls where the bench connects.
How to install wedi Prefabricated Shower Seats and Benches (Prefabricated and field fabricated) Triangles made from wedi 2” (50.8 mm) Building panel may be used to construct and install tile ready, suspended corner seats. The wedi Building Panels may be single sheets or doubled up to 4” (101.6 mm) or more by adhering several triangle cut wedi 2” (50.8 mm) Building Panels using full contact application of a minimum 1/4” × 1/4” (6.4 × 6.
Building Custom Seats and Benches Using 1 1/2“ (38.1 mm) or 2“ (50.8 mm) thick wedi Building Panels wedi offers prefabricated suspended or wall mounted seats and floor standing seats. Both may also be constructed on-site using wedi Building Panels. This is an ideal option that will perfectly accommodate your individual tile and design layout.
Curbs and Ramps wedi curbs and ramps are available in several options for shower entry designs where transitions are required, and can be installed with wedi Fundo shower bases, as well as conventional mortar bed systems. Waterproof and versatile, wedi curbs and ramps may be tiled before glass doors, panels or glass blocks are installed. Epoxy glue is recommended instead of screw fasteners when installing shower door tracks.
Prefabricated Shower Niches wedi prefabricated shower niches are fabricated from wedi 1/2” (12.7 mm) Building Panels for strength and come in five different size options. They are the perfect fit for all your shower necessities. wedi shower niches install quickly and safely, and integrate flush into the wall panel assembly with wedi fasteners and wedi Joint Sealant. Shelves, included in some models, are flexible and can be installed exactly where they will fit your design best.
Installation of wedi Prefabricated Shower Niches wedi offers prefabricated shower niches in various sizes and designs. These can be installed out of the box and fitting into standard 16 in. o.c. framing. It is possible to customize these niches by carefully and cleanly cutting these niches twice and removing a middle section before sealing both niche end parts back together.
wedi Sanoasa® wellness benches & Loungers Sanoasa benches are available in so many different designs, meaning that they can be built into almost any seating combination. Whether we are talking about benches, corner constructions or clean end solutions, once individually tiled, they set the scene in all bathrooms and wellness areas. wedi Sanoasa wellness benches are most often used inside and outside of steam rooms.
wedi Sanoasa® Shine Exclusive wellness loungers with an extravagant design coating. For the sophisticated private bathroom or public wellness facility both internal and external areas the wedi Sanoasa Shine range offers comfortable loungers in five different shapes. The high-quality varnish, applied in a multi-layer process, can be produced in approx. 200 UNI colours (RAL) or with a mother-of-pearl effect, makes each lounger a refined designer furniture element.
200 Approx.
wedi Sanbath® Wash Basin The wedi Sanbath Wash Basin offers an individual, customized wash basin with line drainage (single, double or in a row). Available with a maximum depth of 24” and with wedi drains ranging from 12” to 43”. The drain is 304 stainless steel (standard, exclusive or tileable). Floating structure, load Comes with mounting capacity up to 331 lbs.
wedi Custom Wellness & Spa Design Solutions Starting a new custom project, residential or commercial steam room? Do you need custom loungers? From idea to installation, you have our promise wedi will support you right from the start. The moment you contact us, our team springs into action. We generate custom CAD drawings based upon your ideas and plans. We produce custom products fabricated from impermeable extruded polystyrene foam material exclusively for steam showers and wetrooms.
07 Installation accessories Quick, high-quality and safety guaranteed. The versatile range of wedi accessories offers practical system aids for sealing, bonding and installation. From the tried and tested wedi joint sealant through fleece-backed sealing membranes and corners for all connections and joints in the shower.
wedi Joint Sealant wedi 620 sealant wedi Joint Sealant is indispensable in regular wedi shower assemblies to seal wedi 620 sealant is indispensable in combination with wedi Vapor 85 and wedi and reinforce seams and connections, as well as waterproof fastener points. No Subliner Dry. It is a flexible sealant that offers vapor tight performance.
wedi Subliner® Dry The wedi Subliner Dry System includes Subliner Dry Sheet Membrane, Sealing Tape, Prefabricated Outside and Inside Corner Tapes as well as various Sealing Collars to waterproof entire structures, especially in shower and steam room construction. wedi Subliner Dry is well suited for sealing measures over pre-existing wall or floor underlayment including drywall. Use Subliner Dry in combination with ceramic tiles, slabs, and natural cast tiles for indoor wall and floor areas.
wedi Subliner® Dry Installation on Floors or other suitable, non waterproof underlayments or substrates 01 02 03 04 Lay out wedi Subliner Dry and Apply thinset mortar to the Insert wedi Subliner Dry with the The sheets must overlap 2” cut to size using a knife or prepared subfloor using a printed side facing upward and (50.8 mm) at joints / transitions. scissors. 1/8 × 1/8” (3.2 × 3.2 mm) or press on with a rubber roller or Leave these overlapping areas 1/4 × 1/4” (6.4 × 6.
wedi Joint Sealant wedi Joint Sealant is a flexible sealant and construction adhesive that creates strong connections between wedi assembly parts without additional tape reinforcement. Used for standard wedi shower installations with the wedi Fundo Primo, wedi Fundo Ligno and wedi Fundo Riolito. This would include the drain assembly, building panel installation and the channels, seams and fasteners. Used for pre-made benches and benches constructed from 1.5 in. to 2 in. wedi Building Panels.
08 Technical data The world of wedi systems contains a multitude of individual elements which can be variably used and modularly expanded. So that you can plan purposefully, you will find an overview of third party product testing, building code approvals and certifications, as well as product sizing and dimensions useful in planning project designs, specifications, and installations.
Technical Properties Technical Properties wedi Systems Properties & Test Methods Value (wedi Building Panel and Fundo Shower System Components) ASTM C 578 * Standard Specification for Rigid, Cellular Polystyrene Compliant Thermal Conductivity * 75°F (25°C) - ASTM C518 0.23 Bbtu in/hr F R-Value * 75°F (25°) - ASTM C518 4.3hr ft. 2 F/Btu/in (R Value for 1” wedi = 4.3) Tensile Strength *** ASTM C297 65 psi Shear Strength * Under conditions required in ANSI A118.
ICC-PMG 1189 Report National Building Code Compliances WEDI FUNDO SHOWER SYSTEM AND TILE BACKER BOARD UNDERLAYMENTS CSI DIVISION: 22 00 00 – PLUMBING Section: 22 40 00 – Plumbing Fixtures (Shower System Kit) Product certification system The ICC-ES product certification system includes testing samples taken from the market or supplier‘s stock, or a combination of both, to verify compliance with applicable codes and standards.
wedi Fundo Primo® | Square and Rectangular Shower Bases wedi Fundo Primo, square, 36” × 36” incl. drain 19⁄16“ 4.75 % 7⁄8“ 17½“ A ½“ 4.75 % 17½“ A 36“ 4.75 % 4.75 % ½“ 3.36 % 3.36 % A 3.36 % A 112 48“ 23½“ 3.36 % ½“ 7⁄8“ 23½“ 15⁄8“ wedi Fundo Primo, square, 48” × 48” incl.
wedi Fundo Primo, square, 60” × 60” incl. drain 15⁄8“ 2.60 % 7⁄8“ 59“ 2.60 % A 60“ 2.60 % ½“ 2.60 % 29½“ A wedi Fundo Primo, square, 72” × 72” incl. drain 19⁄16“ 2.12 % 7⁄8“ 71“ 2.12 % A ½“ 2.12 % 35½“ A 72“ 2.
wedi Fundo Primo® | Square and Rectangular Shower Bases 36“ A ½“ 4.75 % A 2.60 % 17½“ 2.60 % 4.75 % 7⁄8“ 59“ 19⁄16“ wedi Fundo Primo, rectangular, 36” × 60” incl. drain 29½“ ½“ 60“ 2.8 % ½“ 13⁄16“ 1½“ wedi Fundo Primo, rectangular, 48” × 60” incl. drain 2.2 % A 47“ 48“ 2.2 % 2.
wedi Fundo Primo, rectangular, 36” × 48” incl. drain 4.75 % 7⁄8“ 19⁄16“ 47“ A ½“ 17½“ 4.75 % A 36“ 3.36 % 3.36 % 48“ wedi Fundo Primo, rectangular, 48” × 84” incl. drain 3.36 % 7⁄8“ 2“ 83“ 2.81 % A 48“ 2.81 % 84“ 115 ½“ 3.
wedi Fundo Primo® | Square and Rectangular Shower Bases wedi Fundo Primo, rectangular, 36” × 72” incl. drain 19⁄16“ 36“ A 4.75 % A 2.12 % 35½“ ½“ 17½“ 2.12 % 4.75 % 7⁄8“ 71“ ½“ 72“ 58¼“ 8.15 % 13¾“ A ½“ 8.15 % ½“ 36“ 2.16 % 11.50 % A 7⁄8“ 2“ wedi Fundo Primo, rectangular, 36” × 72” incl.
wedi Fundo Primo, rectangular, 48” × 72” incl. drain 3.36 % 7⁄8“ 19⁄16“ 36“ 2.12 % A ½“ 3.36 % 23½“ A 48“ 2.12 % 72“ wedi Fundo Primo, rectangular, 60” × 84” incl. drain 2.60 % 7⁄8“ 2“ 83“ 2.81 % 60“ 2.81 % A 84“ 117 ½“ 2.
wedi Fundo Primo® | Square and Rectangular Shower Bases ½“ 2.60 % 7⁄8“ 35½“ ½“ 19⁄16“ wedi Fundo Primo, rectangular, 60” × 72” incl. drain 2.12 % A ½“ 2.60 % 29½“ A 60“ 2.12 % 72“ 60“ 2.67 % 7⁄8“ wedi Fundo Primo, rectangular, 60” × 72” incl. drain, offset A 16“ ½“ 8.67 % A 16“ 2.06 % 8.
2.60 % 2.60 % A 3.93 % A ½“ 21“ 41“ 42“ 3.93 % 1“ wedi Fundo Primo, rectangular, 42” × 60” incl. drain 30“ ½“ 59“ 60“ 2.12 % 41“ 2.12 % A 3.93 % 21“ A ½“ 42“ 3.93 % 1“ wedi Fundo Primo, rectangular, 42” × 72” incl.
wedi Fundo Ligno® | Square and Rectangular Shower Bases, Center Drain A ½“ 23½“ 2.9 % A 47“ 2.9 % 2.9 % 48“ 2.9 % ½“ 13⁄16“ 1½“ wedi Fundo Ligno, square, 48“ × 48“ × 3/4“ 23½“ ½“ 47“ 48“ 1½“ 13⁄16“ 4.1 % ½“ wedi Fundo Ligno, rectangular, 36“ × 48“ × 3/4“ 2.9 % A 35“ 36“ 2.9 % ½“ 17½“ 4.
36“ A ½“ 4.75 % A 2.60 % 17½“ 2.60 % 4.75 % 7⁄8“ 59“ 19⁄16“ wedi Fundo Ligno, rectangular, 36“ × 60“ × 3/4“ 29½“ ½“ 60“ 2.2 % ½“ 13⁄16“ 1½“ wedi Fundo Ligno, square, 60“ × 60“ × 3/4“ 2.2 % A 29½“ 2.2 % A 59“ 60“ 2.
wedi Fundo Ligno® | Square and Rectangular Shower Bases, Center Drain ¾“ ¾“ 2.2 % A ¾“ ¼“ 2.8 % 23½“ Detailed view of drain ¾“ A 47“ 48“ 2.2 % ¼“ 2.
wedi Fundo Riolito® neo | Shower Base, with Integrated Channel Drain wedi Fundo Riolito neo, floor base, with channel drain; 36” × 60” × 1 15/16“ 60“ 59“ ½“ 29½“ 435⁄16“ A ½“ 12.3 % 7.2 % 7.2 % ½“5½“ 115⁄16“ 13⁄8“ ½“ 2.1 % 35“ 36“ A 15½“ 279⁄16“ ½“ 2¾“ 13⁄16“ 2.
wedi Fundo Riolito® neo | Shower Base, with Integrated Channel Drain 279⁄16“ 12.3 % 2.3 % A ½“ A 12.3 % ½“ 23½“ 48“ 47“ 8“ 18.7 % 29⁄16“ ½“ 13⁄8“ wedi Fundo Riolito neo, floor base, with channel drain; 48” × 60” × 2 9/16“ 59“ 60“ wedi Fundo Riolito neo, floor base, with channel drain; 48” × 72” × 2 3/8” 72“ 71“ ½“ 35½“ 435⁄16“ A ½“ 7.2 % 7.2 % 2.5 % 47“ 48“ A 124 8“ 15.
wedi Fundo Riolito® neo Modular | Shower Base, with Integrated Channel Drain ½“ 1¾“ 279⁄16“ 31“ ½“ 32“ A 66¼“ 31“ ½“ 32“ ½“ ½“ A 7⁄8“ 213⁄16“ 13⁄8“ ½“ wedi Fundo Riolito neo Modular, extension module; 32” × 66 3/4” 2.
wedi Fundo Riolito® neo Modular | Shower Base, with Integrated Channel Drain ½“ 17⁄8“ 435⁄16“ ½“ 47“ 48“ ½“ A 66¼“ 7⁄8“ 213⁄16“ A 47“ ½“ 48“ ½“ 13⁄8“ ½“ wedi Fundo Riolito neo Modular, extension module; 48” × 66 3/4” 2.
wedi OneStep Shower System ½“ wedi OneStep Shower Base, center drain; 36” × 36” × 4” ⁄16“ R5⁄ 16“ ½“ 4.42 % R5⁄16“ B 19¾“ ½“ R5⁄16“ 15¾“ 15¾“ 31½“ ½“ 16¼“ 19⁄16“ 4“ 35“ 36“ A 17½“ A 4“ 31½“ B 27⁄16“ 17½“ R5 4“ 36“ R5⁄16“ 7½“ R5⁄16“ A ½“ “ R5 ⁄16“ 15¾“ 15¾“ 31½“ 36“ 4“ 127 4“ 4“ 16¼“ ½“ ⁄16 R5 31½“ B 51½“ 59“ 60“ 2.
wedi OneStep Shower System ⁄16“ R5 ⁄16“ ½“ ½“ 6“ 59“ 60“ 16¼“ R5⁄1 6“ 15¾“ 15¾“ 31½“ 36“ ½“ R5⁄1 4“ B 29½“ A 2.
wedi Shower Niche 1½“ ½“ 1½“ 12“ 1½“ ½“ 315⁄16“ 215⁄16“ ½“ A ¼“ ¼“ A 8“ 5“ 1½“ ½“ wedi Shower Niche 16” × 8” 1½“ 16“ 1½“ 16“ 12“ 1½“ 1½“ 16“ 1½“ 1½“ 1½“ 16“ 129 ½“ 215⁄16“ 315⁄16“ ½“ ½“ ¼“ ¼“ A 12“ A 9“ ½“ 1½“ wedi Shower Niche 16” × 12”
wedi Shower Niche 12“ ½“ 1½“ 315⁄16“ 215⁄16“ ½“ ½“ ½“ ¼“ 16“ A 13“ A ¼“ 1½“ wedi Shower Niche 16” × 16” 1½“ 1½“ 16“ 1½“ 1½“ 16“ 12“ 1½“ 1½“ 1½“ 16“ 1½“ 1½“ 16“ 130 ½“ 315⁄16“ 215⁄16“ ½“ ½“ ¼“ ¼“ A 22“ A 19“ 115⁄16“ ½“ 1½“ wedi Shower Niche 16” × 22”
wedi Shower Niche wedi Lean Combo Shower Niche 16” × 42” B ½“ ½“ 2“ 12“ 2“ 2“ 2¾“ ½“ 13“ ¼“ ¼“ 3¾“ ½“ wedi Cathedral Shower Niche 16” × 30” 90° 16“ B 2“ 135 253⁄16“ 30“ ° A 2“ 38¼“ A A B 2“ 12“ 16“ 1½“ 12“ 2“ 16“ 131 ½“ B 33⁄8“ 2“ 37⁄8“ 2“ 42¼“ A 13“
09 Pricing and Warranty Where do you buy wedi product systems? Head over to www.wedicorp.com and click on “where to buy wedi” to find your local stocking wedi distributor or retailer or give us a call today.
The value of strong partnerships is shown in the added value of our product and support.
For builders & architects Inspiration and ideas for individual design possibilities within a system Secure and coordinated problem-solvers, also able to be implemented on difficult substructures Fast-track renovations and new residential or commercial construction Clean and modular, easy to plan Long-term protection from moisture and mold, especially in wet rooms Significant reduction in energy costs thanks to integrated heat insulation Architectural Specifications and BIM/CAD technical
Become a wedi PRO certified installer and register your wedi projects for a comprehensive 15 /20 Year Warranty 20-year warranty for a wedi bathroom system PRO 15-year warranty for a wedi shower system 136
10-Year Limited Warranty wedi Corp. (“wedi”) warrants that for a period of 10-years from the date of purchase, all products it sells bearing the wedi name (“Products”) shall be free of manufacturing defects and conform to wedi’s published specifications, subject to the terms, conditions and limitations below.
LIMITATIONS ON COVERAGE.
an authorized representative of wedi. EXCLUSIVE REMEDY. The wedi warranties contained herein are in lieu of any and all other warranties, express or implied, including the implied warranties of merchantability and fitness for a particular purpose. Wedi shall not be responsible for consequential, incidental, indirect, or special damages of any kind, including claims for lost profits, except as expressly provided above.
Product Order Information wedi Fundo Primo® Square and Rectangular Shower Bases, Center Drain Dimensions Unit Item # Retail Price Center Drain 36 in. x 36 in. (914 x 914 mm) 1 pc 073735507 $469.98 Center Drain 36 in. x 48 in. (914 x 1220 mm) 1 pc 073735516 $598.84 Center Drain 48 in. x 48 in. (1220 x 1220 mm) 1 pc 073735505 $651.37 Center Drain 36 in. x 60 in. (914 x 1524 mm) 1 pc 073735506 $639.82 Center Drain 48 in. x 84 in. (1220 x 2134 mm) 1 pc 073735522 $1,319.
wedi Fundo Ligno® Square and Rectangular Shower Bases, Center Drain Dimensions Unit Item # Retail Price Center Drain 36 in. x 48 in. (914 x 1220 mm) 1 pc 073732014 $745.56 Center Drain 48 in. x 48 in. (1220 x 1220 mm) 1 pc 073732015 $803.40 Center Drain 36 in. x 60 in. (914 x 914 mm) 1 pc 073732016 $792.69 Center Drain 48 in. x 60 in. (1220 x 1524 mm) 1 pc 073732017 $1,060.49 Center Drain 60 in. x 60 in. (1524 x 1524 mm) 1 pc 073732018 $1,390.
wedi Fundo Riolito® neo Modular Shower Base, with Integrated Channel Drain External Dimensions Length × Width × Height Channel Length Item # Retail Price Line Module 32 in. × 5 3/4 in. (813 × 146 mm) Height Line Module: 1 3/8 in. (35.4 mm) 27 1/2 in. (700 mm) 075100052 $300.00 Line Module 48 in. × 5 3/4 in. (1220 × 146 mm) Height Line Module: 1 3/8 in. (35.4 mm) 43 5/16 in. (1100 mm) 075100053 $360.00 Extension Module 32 in. × 66 3/4 in. (813 × 1700 mm) Height Extension Module: 1 3/8 in.
wedi Fundo Riolito® neo Tileable Cover Plate, Stainless Steel Length × Width × Height Unit Item # Retail Price wedi Fundo Riolito neo Tileable drain cover for Riolito neo base 36 in. × 60 in. and 48 in. × 72 in. (914 × 1524 mm) and (1220 × 1830 mm), Riolito neo Modular 48 in. × 5 3/4 in. (1220 × 146 mm) 1 5/8 in. × 43 1/4 in. × 3/4 in. (41 × 1100 × 19 mm) 1 pc 676797047 $388.70 wedi Fundo Riolito neo Tileable drain cover for Riolito neo base 48 in. × 60 in. and 32 in. × 72 in.
wedi Shower Kit – Primo® Dimension Unit Item # Retail Price Center Drain 36 in. x 36 in. (914 x 914 mm) 1 pc US2000002 $895.00 Center Drain 36 in. x 48 in. (914 x 1219 mm) 1 pc US2000009 $1,100.00 Center Drain 48 in. x 48 in. (1219 x 1219 mm) 1 pc US2000010 $1,160.00 Center Drain 36 in. x 60 in. (914 x 1524 mm) 1 pc US2000003 $1,185.00 Center Drain 42 in. x 60 in. (1066 x 1524 mm) 1 pc US2000013 $1,370.00 Center Drain 48 in. x 60 in. (1219 x 1524 mm) 1 pc US2000011 $1,450.
wedi Shower Kit – Ligno® Dimension Unit Item # Retail Price Center Drain 36 in. x 60 in. (914 x 1524 mm) 1 pc US2000060 $1,460.00 Center Drain 48 in. x 60 in. (1219 x 1524 mm) 1 pc US2000061 $1,769.00 Wall height 80 in. (2032 mm) Standard drain cover included and more options for Fundo Ligno Shower Base (1) wedi 36 in. OR 48 in. x 60 in. x 1/2 in.
wedi Fundo® Drain Units & Kits Standard Drain, PVC, ABS and Brass Unit Item # Retail Price wedi Fundo Drain Kit Standard, ABS, Compression Fit 1 pc US1000003 $77.66 wedi Fundo Drain Kit; Brass, Compression Fit 1 pc US1000004 $92.39 wedi Fundo Glue Drain Kit, PVC 1 pc US1000035 $77.66 wedi Fundo Compression Fit Drain Unit 1 pc US1000012 $10.71 wedi Fundo Brass Compression Fit Drain Unit 1 pc US1000011 $32.96 wedi Fundo Glue Drain, PVC 1 pc US1000034 $13.39 1 pc US1000027 $117.
wedi Fundo® Standard Drain Cover, Stainless Steel Base Length x Width Unit Item # Retail Price Brushed Stainless Steel 4 in. × 4 in. (100 × 100 mm) 1 pc US1000009 $64.27 Brushed Stainless Steel with Screws 4 in. × 4 in. (100 × 100 mm) 1 pc US1000029 $64.27 For this drain cover, the height of your tiling must be at least 1/4 in. For use with wedi Fundo Primo, Ligno, Onestep, Trollo, Nautilo bases.
wedi Fundo® Nautilo Designer Shower Right Entry Dimensions Unit Item # Retail Price wedi Fundo Nautilo, wall unit 73 in. x 58 in. x 79 1/3 in. (1850 x 1475 x 2015 mm) 1 pc 041708000 $4,201.24 wedi Fundo Nautilo, shower base, right entry 74 3/8 in. x 59 2/3 in. x 2 in. (1890 x 1515 x 50 mm) 1 pc 073736066 (special order only) $1,770.94 (special order only) ft wedi Fundo Nautilo, designer shower: Inside wall: approx. 110 sq. ft. No framing needed for this system made of wedi 2 in.
wedi Shower Bench & Seat Full Foam Triangular Seats wedi Triangle Seat Full Foam/ Wall-Floor Adhered Length × Width × Height Unit Item # Retail Price 23 in. x 23 in. (sides) x 20 in. (584 x 584 (sides) x 508 mm) 1 pc 073784101 $270.00 Full foam corner seat made of solid XPS foam. These units are pre-made and ready for thinset installation against walls and feature a 1/8 in. slope to the front.
wedi Sanoasa® Shower Bench 4 wedi Sanoasa Shower Bench 4, straight Length × Depth × Height Unit Item # Retail Price 47 1/4 in. x 15 in. x 3 1/8 in. in. (1200 x 380 x 80 mm) 1 pc US3000000 $343.07 Length × Depth × Height Unit Item # Retail Price 59 in. x 17 7/10 in. x 3 9/10 in. (1500 x 450 x 100 mm) 1 pc 076400760 $1,806.09 78 in. x 17 7/10 in. x 3 9/10 in. (2000 x 450 x 100 mm) 1 pc 076400760 $2,193.11 98 in. x 17 7/10 in. x 3 9/10 in. (2500 x 450 x 100 mm) 1 pc 076400760 $2,580.
wedi Curb Full Foam Lean Master Pack Length × Width × Height Unit Item # Retail Price 2 in. x 3 1/2 in. x 60 in. (51 x 89 x 1524 mm) 1 pc US3000038 $50.00 2 in. x 3 1/2 in. x 60 in. (51 x 89 x 1524 mm) 6 pc US3000031 $301.06 2 in. x 3 1/2 in. x 96 in. (51 x 89 x 2438 mm) 1 pc US3000040 $80.00 Length × Width × Height Unit Item # Retail Price 5 ft. x 15 in., sloped 1 1/2 in. to 1/4 in. (1524 x 406.4 mm, sloped 38.1 to 6.35 mm) 1 pc 073736517 $223.
wedi Building Panel Length x Width x Height Unit/Pallet Item # Retail Price 24 in. x 48 in. x 1/8 in. (600 x 1219 x 4 mm) 10 sheets/ box. US8000006 $29.13 48 in. x 60 in. x 1/4 in. (1219 x 1524 x 6 mm) 25 sheets/pallet US8000013 $72.80 36 in. x 60 in. x 1/2 in. (914 x 1524 x 12.7 mm) 50 sheets/pallet US8000017 $57.00 48 in. x 60 in. x 1/2 in. (1219 x 1524 x 12.7 mm) 50 sheets/pallet US8000014 $74.40 48 in. x 60 in. x 5/8 in. (1219 x 1524 x 15.8 mm) 4 sheets/box US8000011 $82.
wedi Sealant 620 Contents Unit Item # Retail Price 10.5 oz (310 ml) 1 Cartridge US5000088 $28.00 20 oz (600 ml) 1 Sausage US5000083 $38.00 wedi Sealant 620 is a moisture curing sealant remaining very flexible even when cured.
wedi Accessories Meshtape, Self-adhesive Width × Roll Length Unit/Box Item # Retail Price Meshtape, self-adhesive 5 in. × 82 ft. (125 mm × 25 m) 1 roll 095225053 $24.87 Meshtape, self-adhesive *Special Order 24 in. × 164 ft. (600 mm × 50 m) 1 roll 095215052 $236.55 The mesh tape is alkali resistant. wedi Accessories Waterproof Sealing Tape, Fleece Laminated Width × Roll Length Unit/Box Item # Retail Price 5 in. x 32.8 ft. (127 mm × 10 m) 1 roll US5000002 $46.
wedi Accessories Corner Sealing Tape, Fleece Laminated Dimensions Unit Item # Retail Price Inside Corner 4 3/4 in. x 4 3/4 in. x 2 1/4 in. (115 x 115 x 57.15 mm) 2 pcs/bag US5000007 $15.60 Outside Corner 4 3/4 in. x 4 3/4 in. x 2 1/4 in. (115 x 155 x 57.15 mm) 2 pcs/bag US5000008 $15.60 Also for use within wedi Subliner Dry, wedi Vapor 85 applications, and install in wedi 620 Sealant for waterproof performance of seams throughout.
wedi Tools Corner Putty Knife wedi tools, corner putty knife for wedi shower system installations Unit/Bag Item # Retail Price 1 pc US5000044 $4.69 Use to smooth out wedi Joint Sealant applications. wedi Sanbath® Floating Wash Basin with channel Dimensions Unit Custom Option 1 30"-35 1/2 in. with 27 1/2 in. channel height 4.7 in. / depth 19.6 in. (760–900 mm - 700 mm channel height 120 mm / depth 500 mm) 1 pc Custom Option 2 35 1/2 in.- 43 1/4 in. with 27 1/2 in. channel height 4.7 in.
wedi Sanoasa® Comoda Wellness Bench Dimensions Unit Bench element, slope to front 39 3/8 in (1000 mm) 1 pc Bench element, slope to front 78 3/4 in. x 23 5/8 in. x 24 7/16 in. (2000 mm) 1 pc Carrier element, round finish length 39 3/8 in. x 19 11/16 in. x 9 7/8 in. (1000 mm) 1 pc Carrier element, straight finish length 39 3/8 in. x 19 11/16 in. x 9 7/8 in. (1000 mm) 1 pc 90 corner element, straight, slope to front 25 5/8 in. x 19 11/16 in. x 24 7/16 in.
wedi Sanoasa® Bellina Wellness Bench Description Dimensions Unit Item # Retail Price Bench element, slope to front 39 3/8 in. x 19 1/8 in. x 9 7/16 in. (1000 mm) 1 pc 076448015 $259.28 Bench element, slope to front 78 ¾ in. x 19 1/8 in. x 9 1/2 in. (2000 mm) 1 pc 076441000 $554.91 Carrier element, round finish length 39 3/4 in. x 15 1/4 in. x 7 7/8 in. (1000 mm) 1 pc 076441600 $242.79 Carrier element, straight finish length 39 3/4 in. x 15 1/4 in. x 7 7/8 in.
wedi Sanoasa® Loungers Wellness Loungers Dimensions Unit Item # Retail Price Lounger 1, Lounger without heating 75 9/16 in. x 27 9/16 in. x 26 ½ in. (1920 x 700 x 672 mm) 1 pc 076400042 $2,260.47 Lounger 2, Lounger without heating 56 ¾ in. x 27 9/16 in. x 43 3/8 in. (1442 x 700 x 1104 mm) 1 pc 076400045 $2,853.14 Lounger 3, Lounger without heating 73 1/6 in. x 27 9/16 in. x 30 1/16 in. (1856 x 700 x 764 mm) 1 pc 076400049 $2,857.63 Lounger 4, Lounger without heating 79 5/16 in.
Did you know? Great quality installation results depend on not only having great products to use – the Know-How and Experience in how to use them is key too. We have trained a variety of installers around the country and now they fully know and appreciate what they can achieve with wedi. This educational service is offered to all professional contractors of all trades and wedi‘s local Technical Sales Support Managers come out on site and install with you when you do your first wedi shower installation.