Product Brochure
wedi PreLine
The wedi building panel PreLine is a fully prepared building panel element for
easy installation of hot water heating systems. Factory integrated recesses allow
for quick and safe installation of water pipes whilst strong insulation properties
of the material itself prevent heat escaping to the ground thus promote a bal-
anced heat distribution across the entire space. Adhesion of the wedi PreLine
elements to the screed oor and backlling of the pipe ducts is done very
simply with the appropriate tile adhesive (recommendation: modied thinset
mortar). It truly is the perfect element for quick and waterproof implementation
of underoor heating systems.
wedi Vapor 85
For steam rooms with heaviest water and vapor exposure, the wedi Vapor 85 line
is both a clean and fast to install building panel type construction system. It also
provides integrated water and vapor proong throughout the entire assembly
system.
wedi Building Panel – Shower Walls/Wet Areas
and Floors
wedi Building Panels can be applied to shower walls and wet areas perpendicular
or parallel to the framing, saving time and reducing joint frequency. The panels
are fastened quickly and easily in place using wedi fasteners. Once the panels are
secured and seams and fasteners are sealed with wedi Joint Sealant, tiling can
begin immediately. All in a fraction of the time previously required by traditional
methods. The wedi Building Panel combines tile backer board and waterproong
in one product and installation step. This saves time and cost. Its solid waterproof
core eliminates concerns typically associated with alternative waterproong prod-
ucts such as pinholes or delamination. The entire shower structure is protected by
wedi‘s warranty: from top to bottom! The wedi Building Panel is successfully tested
under ANSI 118.10 test standard for load bearing, bonded, waterproof membranes
as well as ASTM C578 the standard for cementitious coated foam backer board.
57