Instruction manual

This function allows the rapid visualization of information and is particularly practical

for watch changes.

Initial Memorization of Information:

Press the

MEM.

button; MEM. flashes on the upper screen. The Electronic Barometer

asks if you wish to memorize the flashes in front of YES or NO.

Use the arrows

to select YES:

• If YES: the air pressure value is recorded with the corresponding date

and time.

• If NO: the dialogue zone becomes a chart zone and MEM disappears from the

upper screen.

Reminder about Memorized Values:

Press the

MEM.

button

Select RAPPEL by using the

buttons

Press

; the recorded values are displayed as follows:

• A cursor appears on the display.

• The cursor corresponds to the moment that the data was recorded

into the device’s memory. The air pressure and time values appear on

the LCD at the top.

A situation that has been recorded into the device’s memory is automatically

erased after 48 hours. Press

to display the chart with the vertical marker.

Please note, the ZOOM mode should allow the marker’s display.

New Memorization:

Press the

MEM.

button

Select CANCEL, confirm with the

button. Use this procedure

for the initial memorization.

MOON PHASE

The Moon icon on upper left corner rotates continuously (showing function), when it

stops (for about 3 seconds) it displays current moon phase.

ZOOM FUNCTION

ZOOM

The full chart screen displays the ZOOM corresponding to the air pressure on 2

coordinates using dotted lines.

The horizontal axis corresponds to time. One dash or one space corresponds

to 1 hour, except in the 48 hr zoom where these symbols correspond

to 2 hours.