Motors | Automation | Energy | Transmission & Distribution | Coatings MW500 Decentralized VSD MotorDrive
www.weg.net The VSD wherever you need The MW500 is a high performance product dedicated for induction motor control, with embedded features and a high protection degree of IP66 / NEMA 4X which allow decentralized installation directly on the motor or on a wall. Designed exclusively for industrial or professional use, the decentralized WEG VSD adds a great deal of flexibility, allowing the user to install the product near to the controlled motor, thus eliminating the necessity of long cables and panels.
www.weg.net Advantages Benefits It is possible for the MW500 to be assembled on a wall or, using the terminal box coupling directly over the W22 or W21 motors. Makes the commissioning easy, saving space and cabling, in other words, reducing cost for all installation. The optional communication network and I/O modules are fast and easily to be installed, allowing adaptation of the standard VSD to each application. Time saving, standardization and optimized costs according to the necessity.
www.weg.
www.weg.
www.weg.net Special Features Conector IP66/NEMA 4X Special conector for Remote HMI (M8) Analog Potentiometer Built-In No need HMI to operate Fins Instead of Fan Reduce maintenance cost LED Indicators Status indication Remote HMI Simple and intuitive Switch-Disconnector Built-In (Optional) Easy and safe machine maintenance Characteristics = Bus connection DC (frame B only) = Connection for brake resistor Increasing the lifetime, protecting the electronic boards against corrosive atmospheres.
www.weg.
www.weg.net SuperDrive G2 Software application to program, control and monitor WEG VSDs. To connect MW500 to a computer it is necessary to use a plug-in module. USB plug-in module Friendly environment FREE download at www.weg.net Trend Function Online graphic monitoring of parameters/variables JJ Possibility to export an image with the respective graph based upon the selected period JJ Changing and Monitoring Parameters in a List/Table Parameter settings can be stored in a computer file format.
www.weg.net SoftPLC - Built-In in the Standard Product Functionalities of a PLC available as standard, allowing the creation of applications. The WLP software and the SoftPLC functionality are a smart and simple way to make your MW500, motor and application work together. Plug-in module required to connect with a computer.
www.weg.net Coding The MW500 code identifies its construction characteristics, nominal current, voltage range and optionals. Using the smart code, it is possible to select the MW500 required for your application simple and quickly.
www.weg.net Drive Ratings The correct way to select a VSD is matching its output current with the motor rated current. The tables below present the expected motor power for each VSD model. Use the motor power ratings below only as a guidance. Motor rated currents may vary with speed and manufacturer. IEC motor powers are based on WEG 4-pole motors; NEMA motor powers are based on NEC table 430-150.
www.weg.net Accessories and Optionals The MW500 VSD was developed to meet the hardware configurations required by a wide range of applications.
www.weg.
www.weg.net Technical Data 1-phase, 200-240 V ac (+10%-15%) 0.75 and 1.1 kW (1 and 1.5 HP) Voltage and power range Power supply 1-phase/3-phase, 200-240 V ac (+10%-15%) 0.25 to 3 HP (0.25 to 2.2 kW) 3-phase, 200-240 V ac (+10%-15%) 2 to 7.5 HP (1.5 to 5.5 kW) 3-phase, 380-480 V ac (+10%-15%) 1.1 to 4 kW (1.5 to 5 HP) Motor connection Supply frequency 50/60 Hz (48 Hz to 62 Hz) Voltage 3-phase, 0-100% of supplied voltage Output frequency 0 a 500 Hz Displacement power factor >0.
www.weg.net Technical Data - Standards Modbus-RTU All plug-in modules for RS485 and CFW500-CRS232 for RS232 Profibus-DP Plug-in module CFW500-CPDP DeviceNet Plug-in module CFW500-CCAN CANopen Plug-in module CFW500-CCAN AC input chokes For reducing THD AC output chokes For longer motor cables UL 508C Power conversion equipment. UL 840 Insulation coordination including clearances and creepage distances for electrical equipment. EN 61800-5-1 Safety requirements electrical, thermal and energy.
WEG Worldwide Operations WEG PINTURAS - Pulverlux Buenos Aires Phone: +54 11 4299 8000 tintas@weg.net AUSTRALIA WEG AUSTRALIA Victoria Phone: +61 3 9765 4600 info-au@weg.net www.weg.net/au AUSTRIA WATT DRIVE - WEG Group Markt Piesting Phone: +43 2633 404 0 watt@wattdrive.com www.wattdrive.com BELGIUM WEG BENELUX Nivelles - Belgium Phone: +32 67 88 84 20 info-be@weg.net www.weg.net/be BRAZIL WEG EQUIPAMENTOS ELÉTRICOS Jaraguá do Sul - Santa Catarina Phone: +55 47 3276-4002 info-br@weg.net www.weg.