User`s manual
Unity 4650 User’s Manual
800034-01 Rev. A 76 wegener.com
ASI TS muted ASI Transport output has been muted per user or network 
command.
Aud 
N
 bad PES data
(
N
=audio port number)
Requested audio PES stream for port 
N
 is invalid or cannot 
be decompressed or processed. There may be a problem in 
the hardware for that audio port or in the uplink Encoder.
Aud 
N
 buff overflow
(
N
=audio port number)
Audio port 
N
 PES data buffer overflow. Audio PES data 
being delivered faster than can be decompressed. There may 
be a problem with the STC at uplink Mux or in the IRD.
Aud 
N
 cmd muted
(
N
=audio port number)
Audio port 
N
 output muted by command from network or 
local user.
Aud 
N
 data lost
(
N
=audio port number)
Audio port 
N
 PES data not available (buffer underflow). 
here may be a problem in the hardware for that audio port or 
in the uplink encoder. Check that PTS values in the audio 
stream do not grossly lead PCR.
Aud 
N
 LD not in PMT
(
N
=audio port number)
No audio PID found in PMT with assigned language 
descriptor for hard-assigned port 
N
. Check that the language 
descriptor requested by the user or network is actually 
assigned to an existing audio stream.
Aud 
N
 PID not found
(
N
=audio port number)
Audio PID found in PMT with requested language descriptor 
but no PES data detected. Check uplink encoder.
Auto-Recovery Auto-recovery in progress. This may be caused by any of 
the following problems on a previously commanded or suc-
cessfully acquired transport stream: (1) IRD unable to 
deliver services for time exceeding Services Recovery Tim-
eout; (2) IRD required to maintain connection to 
COMPEL
and IRD has not detected COMPEL for time 
exceeding Network Recovery Timeout; or (3) IRD detects 
invalid incoming COMPEL header.
Bad audio 
N
 PTS
(
N
=audio port number)
Excessive jumps or jitter in Audio port 
N
 PTS values
Bad PMT One or more Program Map Tables are corrupted. See "No 
PMT" indication.
Bad Sec Micro SN Serial number read from secure processor does not match 
unit. There may be a an attempt at piracy, a defective 
NVRAM memory, or a defective secure processor.
Bad VBI Data F
N
 L
M
(
N
=field number;
M
=line number)
VBI data for field 
N
, line 
M
 is unrecognized or in an unsup-
ported format. Contact TOC to confirm that the version of 
application code in your IRD is current.
Bad Video data Video PES stream appears to be invalid. Check if other 
IRDs see similar problem on the same program.
Table 8: Alarm and Warning Descriptions
LCD Alarm or Warning 
Message
Meaning / Possible Cause










