User Manual
Attention
1
..
The diesel engine operators must familiarize themselves with
this manual
as
well
as
engine
construction
and
strictly follow· the .procedures of operation
and
maintenance especially' the regulations for safety
0tJera-
tion described
in
this manual.
2.
Before operating
an
engine at full load, the
60
hours running
in
should
be
carried out
as
specified
in
the manual. .
3.
Increase its 'speed gradually after stating a cold engine, never
let it
run
at highs speed abruptly,
and
don't
stop the engine
insta.ntly while its cooling water
is
still hot, also do'n't let ti
Ie
engine running long time without load.
4. If the ambient temperature falls below +5°C,drain the cooling
water out of the radiator, the lubricating
oil
cooler
and
the
diesel engine itself completely after stopping the engine. Con-
tinuous keeping the water
in
the
oil
cooler should
be
forbid-
den. .
5. Never
run
the diesel engine without
and
air cleaner so
as
to
.prevent the unfiltered air from entering the cylinders.
6.
The engine
m·ust
be
filled with specified grade fuel
and
·Iubri-
eating oil,
and
a special
and
clean container for each
oil
should
'be used.' The fuel
oil
should
be
settled for
72
hours
and
fil-
tered before' using.
7.
The inspection
and
repair of the components
in
electrical sys-
tem' must
be
carried out by the person
who
has
a good
knowledge, of electricity.
8.
The working environment of the diesel engine should
be
well
ventilated to avoid being polluted by waste gas or smoke.
9.
The power rating
and
amending of the diesel engine
is
ac-
cording to
GB6072.
1 -
2000
the first section of reciprocating
internal
combu?tion engine: standard basic condition, the
rating
and
testing method of power, fuel consumption
and
engine
oil
consumption.
10.
The manufacturing of the diesel engine
is
according to 'the
common techn'ical requirement for
low.
and
middle level
powered diesel engine
in
JB/T8895
-1999
and
Q/WCG094