User Manual
CHAPTER mOPERATION OF THE DIESEL ENGINE
1.
Transportation & installation
When the diesel engine is transported, the front
and
rear lifting bracket should
be
used to lift the engine
and
close attention should
be
paid
to protect the appearance,
accessories
and
oil
pipes of the diesel engine from being damaged.
If the diesel engine will
be
transported for a long distance, the air filter
and
silencer
should
be
dismantled, use plugs
.and
plastics to seal the air intake
and
exhaust hole,
water pump inlet
and
outlet hole, fuel inlet
and
outlet hole. If necessary, use plastic
cover
and
wooden case to pack the diesel engine.
If the diesel engine
is
used for stationary application, the foundation must
be
firm,
the mounting surface must
be
kept horizontal,the driving equipment should conform
to the requirement of stipulation, the working place should
be
spacious, well wenti-
lated,clean
and
rain
- proof.
2.
Fuel, lubricationg
oil
and
cooling water
2.1
Fuel
The
diesel engine
shoul~
adopts diffeent brand
of
light diesel
oil
according to the at-
mospheric temperature(
GB252
-1994)
Atmospheric temperature ( °C) :
>0
o
-..
-10 -10
-..
-
20
-
20
-..
35
Brand
of diesel oil:
o
-10
-20
-35
The
fuel
oil
must
be
kept,
very clean, befor
fil1ing
it into the fuel tank, you should clear
the fuel
oil
for over 3 days
so
as
to make the dust
and
water inside the
oil
precipita-
ted to the bottom,then pich
up
the top clean fuel oil. the fuel
oil
must
be
strictly fil-
tered when filled to the fuel tank.
2.2
Lubricationg
oil
The
diesel engine should adopt different brand
CC
or
DD
diesel lubricating
oil
accord-
ing
to different
area
and
atmospheric temperature.
•
44
•