User Manual

(3 ) Over - heating causes parts be
transmuted
( 4 ) Precision of running balance t09
low
18. Air com.pressorin trouble
Trouble cause and its feature
1. Efficiency gets worse because of
carbondepositedonexhaustvalve,
valvespringbrokenorcylinderliner
worn out
2. Oil mixes because of piston ring
broken,cylinderlinerwornoutoroil
return pipe choked
3. Abnormalsoundcanbeheardwhen
working because of thaft and
bearingwornoutorpistontouches
cylinder head
19. Clutch in trouble
Trouble cause and its feature
1. Clutch slips
( 1) Friction disc V\,Orn out or burn out
(2) Oil dirt on friction disc
2. Clutch disconnects not completely
( 1) Pressing lever worn out
(2) Adjusting plate worn out
( 3) Connectihg· plate worn out
(4 ) Disconnecting bushing pin hole
.
and tree lever shaft pin worn out
(3) Replace
(4) Replace
Remedy
1. Clean off carbon deposit,replace parts
2. Clean and repair, replace parts
3. Check and repair, clean off corbon
deposit, replace parts.
Remedy
1.
( 1) Replace friction dise
(2) C"lean off oil dirt on the friction
disc,pressing plate and flywheel
2."
( 1) Replace in time
(2) Replace in time
(3 ) Replace in time
(4 ) Replace in time
eo 63 e