Operating Instructions
35
Open the inspection window on the ywheel and match the OT mark to the pointer
(Refer gure 5.19).
0
Figure 5.19
Check and conrm compression TDC of the 1st cylinder. Adjust the Clearance in
the following order. (Refer gure 5.20 & 5.21)
CYL. NO 1 2 3 4 5 6
STEP- 1 I E I - - E I - - E - -
Figure 5.20 Figure 5.21
Rotate the engine 360° - match the OT mark to the pointer. Adjust the
clearance in the following order. (Refer gure 5.22).