Instructions / Assembly

16. Make sure that all parts are properly tightened before you use the weight bench. Extra parts may be

included. The use of all remaining parts will be explained in ADJUSTMENT, beginning on page 12.

14. Insert a Weight Rest (29) into one of the adjust-

ment holes into an Upright (1). Repeat this

action for the other Weight Rest. Make sure

that the Weight Rests are at the same height.

Then, insert a Spotter (24) into one of the adjust-

ment holes in an Upright (1). Repeat this action

for the other Spotter. Make sure that the

Spotters are at the same height.

15. If you plan to use Olympic weights (not

included) with the weight bench, perform this

assembly step.

See the upper drawing. Slide an Olympic

Adapter (25) onto the weight storage tube on the

Left Stabilizer (13), and tighten the Set Screw

(39) in the Olympic Adapter. Repeat this action

for the Right Stabilizer (not shown).

See the lower drawing. Slide an Olympic

Adapter (25) onto the weight tube on the Leg

Lever (4), and tighten the Set Screw (39) in the

Olympic Adapter.