Instructions / Assembly

13
ATTACHING WEIGHTS TO THE LEG LEVER
If you plan to use Olympic weights (not included)
with the weight bench, see assembly step 15 and
attach the three Olympic Adapters (25) to the
weight bench.
To use t h e Leg L e v e r (4), s l i de the d e s ired we i g h ts
(not included) onto the weight tube on the Leg Lever.
Secure the weights with the Spring Collar (45) or the
Olympic Spring Collar (46).
STORING WEIGHTS
If you plan to use Olympic weights (not included)
with the weight bench, see assembly step 15 and
attach the three Olympic Adapters (25) to the
weight bench.
Store weights (not included) by placing them on
the weight storage tubes on the Left and Right
Stabilizers (13, 38).
ADJUSTING THE UPPER FRONT LEG
To adjust the height of the Upper Front Leg (27), first
loosen and pull the Adjustment Knob (31) outward.
Move the Upper Front Leg (27) to the desired
position, release the Adjustment Knob (31) into an
adjustment hole in the Upper Front Leg, and then
tighten the Adjustment Knob.
When the Leg Lever (4) is not in use, remove the
Upper Front Leg (27) and store it away from the
weight bench.
4
13
Weight
Storage
Tube
31
27
4
25
25
25
45, 46
Weight
Tube
Weight
WARNING: Do not place
more than 130 lbs. (59 kg) on the Leg
Lever (4).
38