Owner's Manual

13
22. Locate the Long Cable (72). Attach the Long
Cable to the other Small “U”-bracket (71) with an
M
8 Nylon Locknut (3) and an M8 Washer (8).
Note: Do not completely tighten the Locknut;
i
t should be tightened so that only two
threads of the Cable show past the Locknut,
as shown in the inset drawing.
Attach the Small “U”-bracket (71) to the indicated
Weight Tube (63) with an M8 x 45mm Bolt (24)
and an M8 Nylon Locknut (3).
72
71
24
63
8
3
3
22
23. Route the Long Cable (72) over a 90mm Pulley
(15). Attach the Pulley to the Top Frame (55) with
an M10 x 45mm Bolt (12) and an M10 Nylon
Locknut (21).
24. Wrap the Long Cable (72) under a 90mm Pulley
(15). Attach the Pulley and a Cable Trap (66) to
the bracket on the Stabilizer (5) with an M10 x
45mm Bolt (12) and an M10 Nylon Locknut (21).
Make sure that the Cable Trap is turned to
hold the Cable in place.
23
55
72
21
12
15
72
15
21
5
66
12
7
1
3
58
24