Owner's Manual

2
8. Insert an M6 x 53mm Carriage Bolt (38) into the
center hole in the Seat Plate (37). Attach the Seat
P
late to the Seat (13) with two M6 x 15mm
Screws (18).
Insert the M6 x 53mm Carriage Bolt (38) through
t
he indicated hole in the Seat Frame (36). Tighten
an M6 Nylon Locknut (2) with an M6 Washer (10)
onto the Carriage Bolt.
Attach the other end of the Seat (13) to the Seat
Frame (36) with an M6 Washer (10) and an M6 x
50mm Screw (81).
15
28
13
3
8
37
18
36
2
10
81
29. Grease the M8 x 58mm Bolt (33). Attach the Leg
Lever (29) to the Seat Frame (36) with the Bolt
and an M8 Nylon Locknut (3).
Insert the Eyebolt (35) into the Leg Lever (29)
from the direction shown. Tighten an M10 Washer
(9) and an M10 Nylon Locknut (21) onto the
Eyebolt.
30. Rest the Seat Frame (36) on the indicated pin in
the Front Upright (42). Attach the Seat Frame to
the Front Upright with an M8 x 70mm Carriage
Bolt (14) and the Seat Knob (40).
29
30
36
3
Grease
35
33
29
9
21
42
40
36
14
Pin
31. Insert a Pad Tube (28) into the Seat Frame (36).
Slide two 140mm Pads (30) onto the ends of the
Pad Tube.
Insert the other Pad Tube (28) into the Leg Lever
(29). Slide two 140mm Pads (30) onto the ends
of the Pad Tube.
31
36
30
29
30
28