Owner's Manual

11
12. Slide a Foam Pad (22) onto each side of the
Lock Frame (11).
P
ress a Pad Cap (45) into each Foam Pad (22).
P
ull the indicated Long Adjustment Knob (16)
outward, insert the Lock Frame (11) into the Leg
Frame (10), and then release the Long
Adjustment Knob.
Make sure that the Long Adjustment Knob
(16) is engaged in the indicated adjustment
hole in the Lock Frame (11).
Insert an M6 x 37mm Bolt (33) into the Leg
Frame (10) and into the loop on the end of
the Spring (60). Tighten an M6 Nut (43) onto
the Bolt.
13. Insert the Pad Tube (18) into the welded tube
on the Leg Frame (10).
Next, tighten two M4 x 15mm Screws (58) into
the Pad Tube (18).
Slide a Foam Pad (22) onto each side of the
Pad Tube (18).
Then, press a Pad Cap (45) into each Foam
Pad (22).
12
10
43
33
11
60
H
ole
2
2
22
45
45
16
13
10
22
22
18
58
45
45