Owner's Manual

7
10
23
2
3. Attach the Upright Support (5) to the Base (1)
with two M10 x 90mm Bolts (26) and two M10
Locknuts (23). Do not tighten the Locknuts yet.
Insert the Upright (4) into the Upright Base (3).
Attach the Upright and the Upright Support (5) to
the Upright Base with four M10 x 30mm Screws
(27).
See steps 1–3. Tighten the M10 Locknuts (23).
2
3
2. Attach the Upright Base (3) to the Center Base
(2) with two M10 x 95mm Bolts (10) and two
M10 Locknuts (23). Do not tighten the
L
ocknuts yet.
3
4
1
26
5
23
3
27
27