Owner's Manual

9
9. Attach the Bumper (39) to the Curl Bar (17)
with an M4 x 19mm Screw (54).
Attach the Curl Bar (17) to the Leg Lever (5)
with the Pin/Tether (35). Then, attach the Tether
to the Leg Lever with an M4 x 19mm Screw
(54).
10. Attach the Curl Pad (20) to the Curl Post (6)
with two M6 x 20mm Screws (53).
9
10
17
39
54
5
35
54
20
6
53
8. Insert the Long Pad Tube (56) into the bracket
on the Front Leg (4). Slide two Foam Pads (22)
onto the Long Pad Tube, and then press two
P
ad Caps (23) into the Foam Pads.
R
epeat this step with the two Short Pad
Tubes (21) and the Leg Lever (5).
8
23
23
4
5
22
22
56
21
21
Bracket