Owner's Manual

10
10. Attach the Pad Frame (11) to the Assist Arm (9)
with two M8 x 20mm Button Screws (43), two
M8 Washers (37), and two 5mm Spacers (38).
10
9
11
43
43
37
37
38
38
8. Insert the Pull-up Frame (7) into the Rear Top
Frame (6).
Attach the Pull-up Frame (7) with four M8 x
15mm Button Screws (39) and two M8 x 62mm
B
utton Screws (41).
See steps 3–5, and 7. Tighten the M10
Locknuts (35).
8
39
39
41
4
1
3
9
6
7
9. Attach a Pull-up Handle (12) to the Pull-up
Frame (7) with four M8 x 20mm Button Screws
(43).
Slide a Pull-up Handle Cap (28) over the Pull-
up Handle (12) and press the Pull-up Handle
Cap into the Pull-up Frame (7).
Attach the other Pull-up Handle (12) to the
Pull-up Frame (7) in the same manner.
43
43
12
12
7
9
28