Owner's Manual

7
3. Attach the Rear Upright (5) to the Base (1)
using the indicated M10 x 85mm Button Bolts
(51) and two M10 Locknuts (35). Do not tight-
en the Locknuts yet.
5
3
35
35
51
1
2. Press the two Base Leg Caps (22) onto the
Base Legs (2).
I
nsert the two Base Legs (2) into the Base (1)
as shown. Insert four M10 x 90mm Button Bolts
(
42) upward through the Base. Tip: It may be
helpful to place tape over the bolt heads to
hold them in place.
2
2
1
42
42
1
2
22
22