Owner's Manual

10
14. Make sure all parts are properly tightened before you use the weight bench. The use of the remaining parts
will be explained in ADJUSTMENT, beginning on page 11.
13
34
8
13. Attach the Curl Pad (13) to the Curl Post (8) with
two M6 x 16mm Screws (34).
13
12. Insert the two Short Pad Tubes (15) into the Leg
Lever (7). Slide two Foam Pads (41) onto each
S
hort Pad Tube. Then, press two 19mm Round
Caps (23) into each Short Pad Tube.
41
41
41
41
2
3
23
7
15
1
2
23
23