Owner's Manual

6
• To hire an authorized service technician to
assemble the weight bench, call 1-800-445-2480.
• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you complete all assembly steps.
• To identify small parts, see page 5.
• In addition to the included tool(s), assembly
requires the following tools:
one Phillips screwdriver
one standard screwdriver
one adjustable wrench
one rubber mallet
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not use
power tools.
ASSEMBLY
1
1. Attach a Small Plate (5) to the Bench Stabilizer
(2) with two M4 x 15mm Screws (26). Attach the
other Small Plate (5) to the Bench Stabilizer
in the same way.
Insert two M8 x 70mm Carriage Bolts (20)
upward through the Bench Stabilizer (2).
5
20
2
5
26
2. Attach the Bench Frame (1) to the Bench
Stabilizer (2) with the M8 x 70mm Carriage Bolts
(20) and two M8 Locknuts (22). Do not tighten
the Locknuts yet.
22
20
22
1
2
2
Warning
Decal