Owner's Manual

8
6. Attach the Seat (10) and the Seat Carriage
(11) to the Seat Frame (8) with two M6 x 15mm
Screws (27), two M6 x 35mm Screws (28), and
two M6 Washers (24).
7. Insert the Backrest Bracket (6) into the Bench
Frame (1).
Apply a portion of the included grease to an M10
x 180mm Bolt (23).
Attach the Backrest Frames (7) and the Seat
Carriage (11) to the Bench Frame with the M10
x 180mm Bolt, two M10 Washers (25), and an
M10 Locknut (17). Do not overtighten the
Locknut; the Backrest Frames and the Seat
Carriage must pivot freely.
See step 4. Tighten the M8 Locknuts (22).
See step 5. Tighten the M6 x 55mm Screws
(18).
6
10
11
24
28
27
8
11
17
25
25
23
7
6
1
7