User's Manual

Before beginning assembly, carefully read the

following information and instructions:

• Place all parts in a cleared area and remove the

packing materials. Do not dispose of the packing

materials until assembly is completed.

• As you assemble the weight bench, make sure all

parts are oriented as shown in the drawings.

The following tools (not included) may be

required for assembly:

• Two (2) adjustable wrenches

• One (1) rubber mallet

Assembly will be more convenient if you have a

socket set, a set of open-end or closed-end

wrenches, or a set of ratchet wrenches.

Assembly

2. Press a Bench Frame Inner Cap (9) into each end

of the Bench Frame (17).

1. Pivot both Bench Legs (11) down to the position

shown.

Insert a Stabilizer (25) into one of the Bench Legs

(11) as shown. Attach the Stabilizer with two M8 x

85mm Bolts (18), four M8 Washers (26), and two

M8 Nylon Locknuts (28).

Attach the other Stabilizer (25) to the other Bench

Leg (11) in the same way.

Press Stabilizer Outer Caps (10) onto the ends of

both Stabilizers (25).