Owner's Manual

11
11. Slide a Weight Stop (28) onto the weight tube on
a Fly Arm (25).
Slide a Weight Stop (not shown) onto the
other Fly Arm (not shown) in the same way.
11
28
Weight
Tube
25
12. Attach a Fly Arm (25) to an Upright (1) with an
M10 x 120mm Bolt (19) and an M10 Locknut
(33). Make sure that the Fly Arm is resting
against the outer side of the Fly Arm Stop
(15). Do not overtighten the Locknut; the Fly
Arm must pivot easily.
Attach the other Fly Arm (25) in the same
way.
33
25
15
25
19
1
12
13. Insert a Short Pad Tube (12) into one of the Fly
Arms (25) from the side shown. Next, slide a
Foam Pad (23) onto the Short Pad Tube.
Repeat this step on the other side of the
weight bench.
23
12
25
13