Owner's Manual

5
See the drawings below to identify the small parts needed for assembly. The number in parentheses below each
d
rawing is the key number of the part, from the PART LIST near the end of this manual. Note: If a part is not in
the hardware kit, check to see if it has been preassembled. To avoid damaging parts, do not use power
tools for assembly.
M8 Locknut (17)
M6 x 16mm Screw (29)
M10 Locknut (33)
M10 x 63mm Bolt (32)
M6 x 38mm Screw (30)
M8 Washer (16)
M10 Washer (34)
M6 Washer (26)
M10 x 137mm Bolt (36)
M8 x 55mm Bolt (18)
M10 x 120mm Bolt (19)
M8 x 43mm Bolt (39)
M8 x 42mm Carriage Bolt (37)
PART IDENTIFICATION CHART