Owner's Manual

PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST in the center of this manual. Note: Some small
parts may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-
attached.
M10 Large
Washer (58)
M10 Small
Washer (6)
M8 Nylon
Locknut (54)
M10 Nylon
Locknut (11)
M10 x 75mm Bolt (39)
M10 x 30mm Bolt (38)
M10 x 45mm Bolt (40)
M10 x 80mm Bolt (41)
M10 x 25mm Bolt (43)
M8 x 70mm Bolt (30)
M10 x 65mm Bolt (56)
M10 x 20mm Bolt (26)
M8 x 20mm Screw (50)
REMOVE THIS PART IDENTIFICATION CHART AND PART LIST/
EXPLODED DRAWING. SAVE THIS PART IDENTIFICATION CHART
AND PART LIST/EXPLODED DRAWING FOR FUTURE REFERENCE.