Owner's Manual

26
USING THE CURL PAD
To use the Curl Pad (33), remove the indicated 50mm
R
ound Inner Cap (39) and insert the Curl Post (11)
into the Front Leg (10). Tighten the Curl Adjustment
K
nob (58) into the Front Leg. Make sure that the
Adjustment Knob passes through a hole in the Curl
Post.
When you are performing exercises that do not
require the Curl Pad, remove the Curl Pad (33) and
reinsert the 50mm Round Inner Cap (39) into the
Front Leg (10). Note: You must remove the Curl
Pad to use the press arms.
31
32
58
10
39
3
3
11
ADJUSTING THE BACKREST
To adjust the Backrest, loosen and pull the Backrest
Adjustment Knob (53). Move the Backrest in or out of
the Upright (2), and engage the Adjustment Knob into
the Backrest Frame (not shown). Then, tighten the
Adjustment Knob.
The Seat (32) can be adjusted in the same manner.
LOCKING THE WEIGHT STACK
To lock the weight stack, insert the Locking Pin (72)
through one of the holes in the Guide Rods (18) and
secure the Pin with the Lock (73).
2
53
72
18
73