User's Manual

61, Attach the end of the Leg Press CaMe (69) to the

"U"°bracket (50) with an M8 Washer (117) and an

M8 NyUon Locknut (115), Note: Do not complete-

ly tighten the Locknut; it shouJd be tightened

so that only two threads of the Cabte show

past the Locknut, as shown in the inset draw-

ing.

62, Attach the Seat (29) with the seriaU number decaU

on the bottom to the Right Seat Frame (9) with

four M6 x 16mm Screws (85),

Repeat this step with the other Seat (29} and

the Left Seat Frame (not shown).

63, Attach the Right Backrest (28) to the Right

Upright (4) with four M6 x 16mm Screws (85),

64, Attach the Left Backrest (33) to the Backrest

Frame (27) with two M6 x 16mm Screws (85), an

M6 x 35mm Screw (139), and an M6 Washer

(132),

SHde the Backrest Frame (27) into the Left

Upright (5), Engage the Knob (121) into the

Upright and Backrest Frame, and turn it clockwise

until it is tight,

121

j50

115

85 27